The AirTAC GFR200C06MLJNTK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJNTK is a size 200 GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in one body. This configuration has a 1/8 in NPT port, a 40 um standard filter element, a manual drain bowl, and the low-pressure regulator type, with a reverse/check valve fitted. No pressure gauge is supplied and no mounting bracket is included, so plan to pipe in a separate gauge if a visual setpoint is needed and to secure the unit by its piping.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and is ordered with choices of drain type, filter grade, gauge, thread form and bracket. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06MLJNTK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
A compact fixture that clamps workpieces with 1/8 in-piped air cylinders gets filtered, regulated supply in one body; the manual drain lets an operator bleed accumulated water at shift start, and the check valve holds the downstream circuit if upstream pressure dips.
Spray guns need clean air at a steady, modest pressure. The 40 um element catches pipe scale and condensate carryover, the low-pressure regulator type suits circuits running well below standard line pressure, and the manual drain bowl is emptied during booth cleaning.
Air-driven gates that divert bottles between conveyor lanes need dry air and a stable setpoint to stroke consistently. This unit filters and regulates the 1/8 in branch feed in one body, with the check valve preventing backflow through the branch when the line section vents.
Start with the port step: this unit is size 200 with a 1/8 in NPT port; if your line needs more flow, step up to size 300, 400 or 600 with the matching larger port. Drain choice matters: this code carries a manual drain (code M), meaning someone bleeds the bowl; automatic or differential-pressure drains are available on other variants if unattended draining is preferred. The 40 um element here is the standard grade; specify code W for the 5 um fine grade where downstream components need cleaner air. Thread is NPT on this code; PT is the standard form and G (BSPP) is also an order option. Bracket (code J here means none) and gauge options can be selected on other variants.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated figure, and the exact regulation range of the low-pressure (L) type is not stated on the sheet we work from. Ask us to confirm flow and regulation figures against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request before you order.
The manual drain means accumulated water is released by hand from the bowl, which suits attended equipment on a regular maintenance round. Automatic and differential-pressure drain options are available on other GFR variants for points that cannot be bled routinely. Note that with a manual drain the regulator adjustment range differs from the auto/differential versions; the exact range of this low-pressure type is not published on our sheet, so confirm it with us on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.