The AirTAC GFR200C06MLJNWT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJNWT is a size 200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration is built with a 5 um filter element (the finer of the two published grades), a manual drain you operate during scheduled checks, and a low-pressure regulator type for circuits that run below standard working pressures. It is fitted with a 1/8 in NPT thread, and this unit comes without a gauge and without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT (standard), G or NPT threads, manual, automatic or differential-pressure drains, a 40 um standard or 5 um element, gauge options and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm the flow and datasheet figures for your application before ordering.
| Model | GFR200C06MLJNWT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air feeding the actuated divert and fill-gate valves on a bottling line. The 5 um element helps keep grit and water out of the valve spools, and the manual drain suits a plant that already runs scheduled end-of-shift checks.
A low-pressure clamping circuit on a CNC machining fixture, where the workpiece needs a gentler holding pressure than the shop main line delivers. The filter regulator sets that pressure locally at the fixture, right at the 1/8 in take-off point.
Supply air for a laboratory or QA test bench running small pneumatic actuators and sample fixtures. The 5 um grade protects the bench's fine components, and the compact size 200 body fits tight panel space behind the bench.
Start with the port step: size 200 with a 1/8 in NPT thread suits compact circuits; step up to size 300, 400 or 600 if the line's air demand is larger. This unit already carries the 5 um element (code W); the standard grade is 40 um, so choose 5 um where downstream valves, cylinders or instruments need finer protection. The manual drain means condensate is emptied by hand at intervals - if you cannot guarantee regular checks, an automatic or differential-pressure drain variant is the better decode. No gauge is fitted on this code; gauge options with MPa, psi or bar scales exist on other variants. PT is the standard thread and G or NPT are order options - this unit is the NPT option. A bracket can be added on variants where the code does not omit it.
Because flow is published as curves and not as a single rated figure, send us your application's air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application's air demand and we will confirm the flow from the datasheet for this exact unit before you order.
The M in the code sets a manual drain: condensate collected in the metal bowl is emptied by hand during scheduled maintenance. It suits lines with regular check routines. If nobody will drain it routinely, choose an automatic or differential-pressure drain variant instead. Note this code also has no gauge fitted, no bracket, and a 5 um element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.