The AirTAC GFR200C08C2T AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08C2T is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration has a 1/4 in NPT port, a 40 um standard filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element is high enough, so no manual draining routine is needed. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi), and the fitted round gauge reads outlet pressure in psi. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The polycarbonate bowl suits the size-200 frame, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR filter-regulator family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and is available with manual or automatic drains, a 5 um element (code W), square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow figures for this family are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C08C2T AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds clean, regulated air to a machining centre's tool-clamp and chip-clearing circuits, with the 40 um element catching pipe scale and the psi gauge letting setters verify clamp pressure at a glance.
Sits at the drop of a packaging conveyor's air supply, filtering condensate out of the compressed air and holding a steady set pressure for the diverters and pushers that index cartons down the line.
Conditions the air feeding a bench-top pick-and-place station, protecting the cylinder and valve seals from water and grit while the regulator holds the gentle pressure the gripper needs for repeatable part handling.
Start with the port step: this unit is the size-200 frame with a 1/4 in NPT port; larger frames (300/400/600) move up to 3/8 in through 1 in and suit higher air demand, so match the frame to your line's flow requirement before ordering. This version carries the differential-pressure drain (the default); manual-drain and automatic-drain variants exist if your duty cycle or bowl access calls for them. The 40 um element is the standard grade - if you need finer filtration downstream of this unit, the W-code 5 um element is the catalogue option. The round psi gauge fitted here is one of the gauge choices; an embedded square gauge is standard, and MPa or bar scales are available. Thread is NPT on this code, with PT (standard) and G as order options, and the mounting bracket is included. Flow for this family is published as curves, not a single rated figure, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as performance curves rather than a single rated figure, so we do not quote a l/min or SCFM number. Tell us your application and we will confirm the flow data from the datasheet on request, so you can size the unit with confidence before ordering.
The differential-pressure drain is the default option: it discharges collected condensate automatically when the pressure drop across the 40 um element rises, so the bowl empties itself during normal operation. If your compressor runs intermittently or the unit sits where you prefer a set maintenance routine, manual-drain and automatic-drain variants are available in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.