The AirTAC GFR200C08C2TK AirTAC Filter Regulator, NPT1/4, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08C2TK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in a single body. This 200-size unit is threaded 1/4 in NPT, carries the standard 40 um filter element, and drains condensate by differential pressure. It is fitted with a round pressure gauge reading in psi and a reverse (check) valve, and the mounting bracket is included. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing). The bowl on the 200 size is polycarbonate.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include a 5 um element (code W), automatic or manual drains, square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads, a low-pressure variant and the check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR200C08C2TK AirTAC Filter Regulator, NPT1/4, 40 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a packaging line, condition and regulate the air feeding the taping head's downstroke cylinders, so clamp pressure stays steady through every box cycle.
Feed a pneumatic clamping fixture on a small press: the 40 um element strips water and scale before the regulator holds the clamp pressure you set.
Set a stable, filtered supply to a spray gun in an automotive refinish booth, with compressor water and pipe scale removed before the gun.
Choose the size by the port and flow your line needs: this 200 unit takes 1/4 in, while 300, 400 and 600 step up to larger ports and higher flow - we can check the flow curve against your demand before you order. Drain: this unit uses differential-pressure drainage, which bleeds condensate as flow drops; automatic or manual drains are orderable in the same series. Filter grade: 40 um standard, 5 um with code W. Gauge: this unit has a round gauge reading in psi; the embedded square gauge and MPa or bar scales are options. Thread: PT is the AirTAC standard, with G (BSPP) and NPT (this unit) as order options. A mounting bracket is included, and the check valve (code K) holds downstream pressure if the supply drops.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote one here. Tell us your line pressure and air demand and we will confirm the correct size against the datasheet on request.
This unit drains collected condensate as flow drops across the element, so there is no manual blowing down in normal duty. If your application suits a fully automatic drain or a manual drain instead, those are orderable variants within the same GFR series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.