The AirTAC GFR200C08JC1T AirTAC Filter Regulator NPT1/4, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08JC1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single 200-size body. This configuration carries a 1/4 in NPT port, a 40 um standard filter element, a differential-pressure drain that bleeds condensate automatically as flow passes through, and a round pressure gauge scaled in MPa. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and no mounting bracket is fitted.
This is a genuine AirTAC part. The GFR family is published in 200, 300, 400 and 600 sizes with port options from 1/8 to 1 inch, PT as the standard thread and G or NPT as order options, plus drain, filter-grade and gauge choices. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C08JC1T AirTAC Filter Regulator NPT1/4, 40 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding a bench-mounted pneumatic press or clamping fixture: the 40 um element stops scale and pipe debris reaching the cylinder valves, while the regulator holds a steady working pressure so cycle force stays repeatable. The differential-pressure drain clears condensate during continuous production runs.
Supplying the air cylinders on a carton-sealing or case-packing conveyor: filtered, regulated air keeps the diverters and pushers moving at a consistent speed through a full shift, and the round MPa gauge lets an operator verify set pressure at a glance.
Fitted at a 1/4 in take-off on a workshop or maintenance-shop air ring main: it conditions the branch feeding air tools and small actuators, protecting them from water carry-over and letting each station run at its own set pressure independently of the main line.
Start with the port and size step: 200-size units take 1/4 in ports, and the larger 300/400/600 sizes carry bigger ports and higher flow, so match the size to the air demand of the circuit rather than only to the existing pipe. Choose the drain next: differential-pressure (this unit) suits continuously flowing lines, automatic drain suits intermittent duty, and manual drain suits low-moisture or monitored installations. Filter grade is 40 um as standard; specify the W code for 5 um where finer protection is needed. Gauge style and scale (square embedded or round external; MPa, psi or bar) are selectable, as is thread: PT is the standard, with G and NPT available as order options. Brackets are optional on GFR units. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Tell us your application and required flow, and we will confirm the sizing against the datasheet on request before you order.
The blank drain position on a GFR code means a differential-pressure drain: condensate is bled off automatically as air flows through the bowl, with no operator action needed. If your line runs intermittently, the A code (automatic drain) or M code (manual drain) versions are available in the same family - ask us for the variant that suits your duty cycle.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.