The AirTAC GFR200C08JC2W AirTAC Filter Regulator PT1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08JC2W is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration has a PT1/4 (1/4 in) port, a fine 5 um filter element (the W grade, versus the 40 um standard), a differential-pressure drain, a round pressure gauge reading in psi, the standard regulator type, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the regulation range is 0.15-0.9 MPa (20-130 psi), and the operating temperature is -5 to 70 C (non-freezing). The polycarbonate bowl suits this 200 size.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600, with a choice of port size, PT, G or NPT thread, differential-pressure, automatic or manual drain, 40 um or 5 um filtration, gauge style and scale, and bracket options. Flow figures are published as curves rather than a single rating, so we confirm the datasheet numbers for your application on request.
| Model | GFR200C08JC2W AirTAC Filter Regulator PT1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated air to the cylinders and valves of a cartoner or wrapper, where the 5 um element protects fine control valves from water and particulate carryover.
Supplying a clamping or press fixture on an assembly cell, where the regulator holds a steady set pressure on the fixture cylinders while the filter keeps moisture out of the circuit.
A drop at a maintenance bench or tool station, giving technicians filtered, pressure-adjusted air for impact wrenches, air ratchets and other hand-held pneumatic tools.
Size and port set the flow capacity: this unit is size 200 with a PT1/4 (1/4 in) port, the smallest GFR size; step up to 300, 400 or 600 if your line needs more flow. Drain type is a real choice: differential-pressure (as fitted here, drains as the pressure drop builds), automatic, or manual. Filter grade is 40 um standard or 5 um with the W code - this model carries the 5 um element for finer protection. Gauge options are an embedded square gauge or an external round gauge, with MPa, psi or bar scales; this unit has a round psi gauge. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and a bracket can be added if panel or wall mounting is needed. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the flow and other datasheet figures for this exact model on request.
The W code in the model number selects the 5 um filter grade instead of the 40 um standard, for finer protection of downstream equipment. The drain is the differential-pressure type, which drains the bowl automatically as the pressure drop builds; automatic and manual drains are available as alternative order codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.