The AirTAC GFR200C08JC2WG AirTAC Filter Regulator G1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08JC2WG is a GFR-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure steady. This unit is built on the GFR200 size with a G1/4 (1/4 in) port, a 5 um filter element, and a differential-pressure drain that discharges condensate as the pressure drop across the element rises. A round gauge reading in psi is fitted so the set pressure is visible, and the standard regulator covers 0.15-0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi). The polycarbonate bowl suits ambient temperatures of -5 to 70 C (non-freezing), and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options including manual or automatic drains, the 40 um standard element, square or round gauges with MPa, psi or bar scales, PT, G or NPT threads, and a reverse/check valve. AirTAC publishes flow for this family as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures for your application on request.
| Model | GFR200C08JC2WG AirTAC Filter Regulator G1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air at the machine's 1/4 in drop keeps tool-change cylinders and clamps from seeing pressure swings or scale carried over from the shop air main.
Point-of-use regulation ahead of diverter and gate cylinders on a packaging conveyor, with the 5 um element protecting tight-tolerance directional valves from fine particles.
Steady, filtered air for small pneumatic actuators on laboratory sampling and dosing skids, where the fitted psi gauge lets technicians verify setpoints at a glance.
Choose the GFR200 size when your line's 1/4 in porting and expected air demand sit at the low end of the GFR range; sizes 300, 400 and 600 step up in port and flow capacity. This configuration carries the 5 um element (code W) instead of the 40 um standard, a differential-pressure drain, and a round gauge reading in psi; square gauges and MPa or bar scales are alternatives within the family. The thread here is G, with PT as the standard and NPT orderable. A mounting bracket can be added where the unit is not piped directly. Because AirTAC publishes flow only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR range as curves, not as a single rated number, so we do not quote a figure here. Send us your application details and we will confirm the datasheet and flow curve for GFR200C08JC2WG on request.
The W in the code specifies the 5 um element instead of the 40 um standard, a good choice when downstream valves or instruments are sensitive to fine particles. With no drain letter in the code, the bowl uses the differential-pressure drain, which discharges condensate as the pressure drop across the element rises; manual (M) and automatic (A) drains are the other catalogue options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.