The AirTAC GFR200C08JF1T AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08JF1T is a size 200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 1/4 in NPT port, a differential-pressure drain that bleeds collected condensate automatically whenever the pressure drop across the element is high enough, standard 40 um filtration, an embedded square gauge reading in MPa, and no mounting bracket. The standard regulator covers 0.15-0.9 MPa (20-130 psi) of adjustment, maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). For the size 200 body the bowl is polycarbonate.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and can be ordered with manual or automatic drains, a 5 um element (code W), different gauge scales, G or NPT threads in place of the PT standard, and with or without a bracket. Flow figures are published as curves rather than a single rating, so ask us and we will confirm the datasheet values for your application on request.
| Model | GFR200C08JF1T AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Mounted ahead of a machine-tool clamping circuit, this unit filters machining-air moisture and chips out of the supply and holds a steady, set clamp pressure so workholding does not drift during a cycle.
Installed at the drop point of a packaging conveyor's air line, it cleans the supply and regulates the pressure feeding stop gates and diverter cylinders, protecting seals from water and particulate carryover.
Fitted at the take-off feeding a bottling line's lift and fill cylinders, it removes condensate from the plant air and sets a controlled working pressure so filling heads repeat their stroke consistently.
Start with the port and size: this unit is size 200 with a 1/4 in NPT port, and the larger sizes (300, 400, 600) step up in port and flow capacity, so match the size to the air demand of the circuit. Choose the drain to suit access: differential-pressure (this unit) needs no attention, automatic drains continuously, and manual drains suit positions you visit regularly. Filtration is 40 um standard; specify the 5 um W element where downstream equipment needs finer air. Gauge scale can be MPa, psi or bar, and the thread can be ordered as PT (standard), G (BSPP) or NPT. A bracket is optional.
One honest note before you order: AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a flow number here. Send us your application details and we will confirm the sizing against the datasheet curves before you commit.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC does not publish a single rated flow figure for this family; flow is given as performance curves instead, so we do not quote a number here. Tell us your application and we will confirm the relevant datasheet figures on request before you order.
The differential-pressure drain is the standard option: it purges collected condensate automatically when the pressure drop across the filter element rises, with no operator attention. If your installation suits it, the same GFR200 body can be ordered with a manual drain or an automatic drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.