The AirTAC GFR200C08JF2TK AirTAC Filter Regulator 1/4 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08JF2TK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in one body. This configuration is a size 200 unit with a 1/4 in NPT port, a 40 um standard filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element is high enough. Downstream pressure is set with the embedded square gauge (psi scale) over a regulation range of 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi) and a working temperature of -5 to 70 C (non-freezing). A reverse/check valve is fitted, and this version is supplied without a mounting bracket. The polycarbonate bowl suits indoor compressed-air duty at this size.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and can be ordered with a 5 um element, automatic or manual drain, alternative gauge scales (MPa, psi or bar), G (BSPP) or NPT threads, and with or without a bracket and check valve. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C08JF2TK AirTAC Filter Regulator 1/4 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Cleaned and regulated air feeding the tool-change clamps and pneumatic gates of a CNC machining centre, where the 40 um element keeps chips-laden shop air out of the valves and the psi gauge lets maintenance set the clamp pressure at the machine.
Point-of-use preparation for the diverters, pushers and sealing jaws on a carton packaging line, with the check valve holding the set pressure against upstream dips while the differential-pressure drain keeps condensate out of the seal cylinders.
Filtered, regulated air for the gripper and wrist circuits of a pick-and-place robot cell, where the square psi gauge gives operators a visible setpoint at the cell and the compact size 200 body mounts close to the drop without a bracket.
Start with the port and size step: size 200 with a 1/4 in NPT port suits lighter branch lines, while sizes 300, 400 and 600 carry progressively more flow - match the step to your line's demand and let us confirm the curve figures before you order. Choose the drain to match the duty: differential-pressure (this unit) drains itself in service, automatic suits unattended installs, and manual suits intermittent or monitored use. The 40 um element is the standard grade; specify 5 um (code W) where finer particulate protection is needed. Gauge scale is selectable as MPa, psi or bar - this unit ships with the square gauge reading psi. Thread is PT as the AirTAC standard, with G (BSPP) and NPT as order options (this unit is NPT). A bracket (or its omission, as here) and a reverse/check valve are also decodable choices. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure, downstream setpoint and expected air demand, and we will confirm the datasheet curve figures for this 1/4 in NPT, size 200 unit on request before you order.
This unit has the differential-pressure drain, the default for the GFR family: collected condensate is discharged automatically whenever the pressure drop across the 40 um element is high enough, with no operator action. Choose automatic drain (code A) for fully unattended installs, or manual drain (code M) where air use is intermittent and someone checks the bowl regularly. Note the regulation range differs by drain type: 0.15-0.9 MPa (20-130 psi) for this differential-pressure version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.