The AirTAC GFR200C08JF2W AirTAC Filter Regulator PT1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08JF2W is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain that bleeds collected condensate automatically as flow passes through, and an embedded square gauge reading in psi. The outlet pressure is adjustable over 0.15-0.9 MPa (20-130 psi), the maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The port is PT1/4 (1/4 in), and no mounting bracket is included with this code.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and can be ordered with manual or automatic drains, a 40 um or 5 um element, different gauge scales, G (BSPP) or NPT threads in place of the PT standard, and with or without a bracket. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C08JF2W AirTAC Filter Regulator PT1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates the air to clamp cylinders on a CNC machining cell, holding a set clamping pressure while the 5 um element keeps wear particles and water out of the valve stack.
Conditions the supply to benchtop pneumatic test rigs where a steady, filtered pressure is needed; the psi-scale square gauge lets operators read and set the line at a glance.
Supplies the reject pushers and diverters on a packaging conveyor, with the differential-pressure drain shedding condensate during continuous running so the actuators stay dry.
Start with the port and body size: this unit is size 200 with a 1/4 in PT port, the smallest step in the GFR range - step up to 300, 400 or 600 if your line needs more flow capacity. Choose the drain to match access: differential-pressure (fitted here) needs no attention during operation, automatic drain (code A) empties the bowl on its own cycle, and manual drain (code M) suits attended installations. The 5 um element in this code is the finer grade; the 40 um standard element is the economical choice where only coarse protection is needed. Gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket are all selectable.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we cannot quote a rated flow here. Send us your application details and we will confirm the datasheet and correct size before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow number here. Tell us your application - working pressure, downstream consumption and duty - and we will confirm the datasheet and check this 1/4 in size against your requirement before you order.
The W code at the end of GFR200C08JF2W selects the optional 5 um filtration grade; the catalogue standard for the GFR family is 40 um. Choose 5 um where downstream valves, cylinders or instruments need finer protection, and 40 um where coarse water and particle removal is enough. The drain on this unit is the differential-pressure type, which passes condensate out during flow without a manual or timed dump.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.