The AirTAC GFR200C08LC2GK AirTAC Filter Regulator G1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08LC2GK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration is the low-pressure type with a G1/4 (BSPP) port, a 40 um standard filter element, a differential-pressure drain in the bowl, a round external gauge reading in psi, a built-in reverse/check valve, and a mounting bracket included. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, manual or automatic drain options, a 5 um (W) filter grade, gauge and scale choices, and G or NPT thread variants. Exact figures such as the low-pressure regulation range and flow data are published as curves in the datasheet - ask us and we will confirm them for your application before you order.
| Model | GFR200C08LC2GK AirTAC Filter Regulator G1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates the air to pneumatic clamping and holding fixtures that work at reduced pressure, filtering water and chips-carrying condensate out of the shop air before it reaches the cylinders.
Conditions the supply to the low-pressure sealing, coding and labelling heads on a packaging line, keeping moisture and particulate out of the small cylinders while holding a stable, gentle working pressure.
Prepares the air feeding spray guns and coating applicators, where the low-pressure regulator type lets the line run at reduced settings and the 40 um filter catches water and dirt that would spoil the finish.
Start with the size and port: 200 is the smallest GFR frame, here with a G1/4 port, so check it against the air consumption of the circuit it feeds - if your demand is higher, step up to GFR300/400/600. Because this is the low-pressure type (code L), it is intended for circuits that work below standard regulator settings; the exact adjustment range for this variant is not published as a single figure, so confirm it with us against your set pressure. The 40 um element is the standard grade; specify the W code if you need 5 um filtration. Drain is differential-pressure here, but automatic (A) and manual (M) versions exist. The C2 gauge code means a round external gauge with a psi scale; square embedded gauges and MPa/bar scales are alternatives. Thread can be ordered as G (this unit) or NPT instead of the PT standard, and the bracket is included on this code.
Flow for this series is published as curves rather than a single rated figure, so we do not quote a number here - send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and operating pressure and we will confirm the flow and sizing from the datasheet on request before you order.
C2 means the unit is fitted with a round external pressure gauge reading in psi (square embedded gauges and MPa or bar scales are the alternatives). K means a reverse/check valve is built in, holding downstream pressure if the supply drops. The L code marks this as the low-pressure regulator type, and the trailing G is the G (BSPP) thread - NPT is available as an order option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.