The AirTAC GFR200C08LC2T AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08LC2T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size-200 unit has a 1/4 in NPT port, a 40 um standard filter element and a differential-pressure drain, the catalogue default drain type. It is the low-pressure (L) regulator variant, fitted with an external round gauge reading in psi and supplied with a mounting bracket; no reverse/check valve is fitted.
This is a genuine AirTAC part. It handles a maximum inlet pressure of 1.0 MPa (145 psi) and operates from -5 to 70 C in non-freezing conditions; at size 200 the bowl is polycarbonate (only size 600 uses an aluminium bowl). The GFR line runs from size 200 to 600 with port sizes from 1/8 to 1 in across the series, plus choices of drain type, 5 um (W) filtration, gauge style and scale, G/NPT threads and bracket options. Because AirTAC publishes flow as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
| Model | GFR200C08LC2T AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Clean, regulated low-pressure air for glue heads, label presses and reject-gate cylinders on a beverage bottling line, with the 40 um element protecting downstream valves from water and debris.
Filtered, pressure-controlled air for workholding clamps and chip-clearing nozzles on a CNC machining cell, with the round psi gauge giving the operator a local set-point reading.
Regulated air to diverter gates and stopper cylinders on a distribution-centre conveyor, holding actuator pressure steady at low set-points where a standard-range regulator would sit near the bottom of its scale.
The real choices on this family are all decodable from the code. Step size and port to the duty your line needs: 200/300/400/600 with ports from 1/8 to 1 in. Choose the drain: differential-pressure (default, as fitted here), automatic (A) or manual (M). Choose the element: 40 um standard or 5 um with code W. Choose the gauge: an embedded square gauge is standard and an external round gauge is optional, with MPa, psi or bar scales. Thread: PT is the standard; G (BSPP) and NPT, as on this unit, are catalogue options to order. Brackets are optional on the series and included here. One honest note: AirTAC publishes flow as curves, not a single rated figure, and the adjustment range of this low-pressure variant is not in our validated data - ask us to confirm both against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and expected air demand and we will confirm sizing from the datasheet on request.
It marks the low-pressure regulator variant. The exact adjustment range of this variant is not published in our validated data, so we confirm it from the AirTAC datasheet on request; standard GFR units with the differential-pressure drain adjust from 0.15 to 0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.