The AirTAC GFR200C08LC2WT AirTAC Filter Regulator, NPT1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08LC2WT is an AirTAC GFR-series filter regulator: filtration and pressure regulation combined in one body, removing water and particulate from compressed air and holding a reduced downstream pressure. This size 200 unit is threaded NPT1/4 and is the low-pressure (L) type, intended for circuits that run a reduced supply pressure; the exact adjustment range for the low-pressure type is not published, and we confirm it on request. It carries a 5 um filter element (code W, against the 40 um standard), a differential-pressure drain (the default drain type), a round pressure gauge reading in psi, and a mounting bracket; no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, PT as the standard thread and G or NPT as order options, drain choices of differential-pressure, automatic or manual, 40 um standard or 5 um filtration, and embedded square or external round gauges in MPa, psi or bar scales. Flow for this series is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200C08LC2WT AirTAC Filter Regulator, NPT1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Grippers and small handling cylinders on electronics and light-assembly cells run at a reduced setting so parts are held without crushing. This unit filters the shop air to 5 um to protect fine valve internals, regulates the reduced gripper pressure in one compact body, and its psi gauge lets a technician verify the setting at the cell.
Bottle clamps and hold-downs on filling and conveyance lines need a gentle, repeatable clamping force rather than full line pressure. Mounted on the line frame with the included bracket, this filter regulator cleans the air feeding the clamp valves and holds the reduced clamp pressure, with the differential-pressure drain handling condensate carryover from the main ring main.
Valve manifolds and small actuators on lab automation and sample-handling equipment are sensitive to particles and moisture in the supply. This unit conditions the air at the equipment inlet, holds the low supply pressure the manifold is set up for, and the round psi gauge gives operators a visible check that the supply is where it should be.
The real, decodable choices on this family: size (200/300/400/600) and port (1/8 to 1 inch) stepped against the air your circuit actually uses; drain type - differential-pressure as on this unit, automatic (A) or manual (M); filter grade - 40 um standard or 5 um with the W code, fitted here for finer protection of downstream valves and cylinders; gauge - embedded square as standard or an external round gauge in MPa, psi or bar (this unit: round, psi); thread - PT standard with G and NPT to order (this unit: NPT); and the bracket, included here (code J deletes it). Flow for the G series is published as curves, not a single rated figure, so send us your supply pressure, set pressure and expected air consumption and we will confirm the right size against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a flow number for this unit. Send us your supply pressure, required set pressure and expected air consumption, and we will confirm from the datasheet whether size 200 with a 1/4 inch NPT port suits your application before you order.
L marks the low-pressure regulator type, for circuits that hold a reduced supply pressure rather than the standard adjustment band. The exact adjustment range for the low-pressure type is not published in the material we work from, so we confirm it on request. The rest of this code reads: 08 = 1/4 inch port, T = NPT thread, W = 5 um element, C2 = round gauge with psi scale, and no J code means the mounting bracket is included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.