The AirTAC GFR200C08LF2T AirTAC Low-Pressure Filter Regulator 1/4 NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08LF2T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built around a 1/4 in NPT port with the 40 um standard filtration element, a differential-pressure drain, and the low-pressure regulator type. An embedded square gauge with a psi scale is fitted so operators can read and set downstream pressure directly, and a mounting bracket is included for fixing. No reverse/check valve is fitted.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The bowl at this size is polycarbonate (PC); only the 600 size uses an aluminium alloy bowl. Because the exact regulation range of the low-pressure type and the flow data are published as curves rather than a single rating, we confirm both from the datasheet on request.
| Model | GFR200C08LF2T AirTAC Low-Pressure Filter Regulator 1/4 NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered and low-pressure regulated air feeds the gripper actuators on a pick-and-place unit, keeping moisture and particles out of the valve stack while holding a gentle, repeatable grip pressure.
Supplies conditioned air to the jaw and flap-folding cylinders on a carton-sealing station, where the low-pressure regulator type suits circuits that run well below standard shop-air pressure.
Gives a laboratory or QA test bench a single point where air is cleaned and set to a low test pressure, with the psi square gauge providing a direct local reading at the rig.
Choose the size and port against the air demand of the circuit: this unit is size 200 with a 1/4 in NPT port, the smallest step in the GFR range, while sizes 300, 400 and 600 carry larger ports for higher flow. The drain here is differential-pressure, which bleeds the bowl automatically as inlet flow varies; automatic (A) and manual (M) drains are order options if you prefer. Filtration is the 40 um standard element; specify the W code for the 5 um element where downstream equipment needs finer air. The fitted square gauge reads in psi, with MPa or bar scales available and an external round gauge as an option. Thread is NPT on this unit; PT (the standard) and G are order options, and a no-bracket (J) variant exists. Flow for the GFR series is published as curves rather than a single rated figure, so send us your application's air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application's air demand and operating pressure and we will confirm suitability against the datasheet curves on request.
L marks the low-pressure regulator type: the unit filters and regulates like any GFR, but its regulator is built for circuits that run at low pressure. The exact regulation range for this type is not published as a single figure, so we confirm it from the datasheet on request. The rest of the code decodes as: size 200, 1/4 in NPT port, differential-pressure drain, 40 um element, square gauge with psi scale, bracket included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.