The AirTAC GFR200C08LJC2TK AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08LJC2TK is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This 200-size unit is threaded NPT1/4 (1/4 in) and is built as the low-pressure regulator type; the catalogue does not publish an adjustment range for that type, so we confirm it on request. It carries the standard 40 um filter element, a polycarbonate bowl with a differential-pressure drain, a round gauge reading in psi, and a fitted reverse (check) valve; no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family runs from 200 through 600 sizes with ports from 1/8 to 1 in, and can be ordered with manual or automatic drains, a 5 um element (code W), square or round gauges in MPa, psi or bar scales, G (BSPP) or NPT threads in place of the PT standard, and with or without a bracket. AirTAC publishes flow as curves rather than a single rated figure, so share your application details and we will confirm sizing and the datasheet on request.
| Model | GFR200C08LJC2TK AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, pressure-regulated air for clamp cylinders on a CNC fixture, with the low-pressure regulator holding a set clamping pressure and the round psi gauge giving the operator a visible reference at the machine.
Clean, regulated air for the pusher and diverter cylinders that sort bottles between lanes, with the 40 um element keeping rust and pipe scale out of the directional valve spools downstream.
A stable low-pressure air supply for gauges, sensors and small actuators on a quality-control test bench, with a reverse (check) valve fitted in the circuit and the psi gauge readable at the panel.
The real choices in this family are all decodable from the code. Size (200/300/400/600) sets the port and the flow capacity - match the port to your line, then ask us to check the flow curve against your demand, because AirTAC publishes flow as curves, not one rated number. Drain type here is differential-pressure; manual (M) and automatic (A) drains are orderable. The 40 um element is standard and 5 um (code W) is the option if downstream equipment needs finer filtration. This unit carries a round gauge reading psi; the embedded square gauge is the standard fitment and MPa or bar scales are alternatives. Thread is NPT on this code; PT is the AirTAC standard and G (BSPP) is also available. Brackets are optional - this code is supplied without one. If anything is unclear, we confirm it from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote for the GFR200C08LJC2TK. Send us your line pressure, port size and expected air demand and we will confirm the flow curve and the full datasheet on request before you order.
The embedded square gauge is the standard fitment on GFR units, and an external round gauge is the catalogue option. This code carries the round gauge with a psi scale; MPa and bar scales are also available to order. If you prefer the square gauge, we can quote the matching code and confirm the details on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.