The AirTAC GFR200C08LJC3T AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08LJC3T is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body, in the 200 size with a 1/4 in NPT port. This configuration is the low-pressure regulator type, fitted with a differential-pressure drain, the 40 um standard filter element, a round pressure gauge reading in bar, and no mounting bracket or reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate; size 600 units in the family use an aluminium alloy bowl.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and with a choice of drain type, 40 um or 5 um filtration (code W), gauge style and scale, and PT, G or NPT thread. Flow for the series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C08LJC3T AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, low-pressure regulated air to the sealing and clamp cylinders on a carton-sealing conveyor, with the 40 um element keeping water and debris out of the directional valves and the differential-pressure drain clearing collected condensate.
A low-pressure air drop feeding spray guns in a woodwork finishing booth, where the regulator holds a gentle setting for delicate finishes, the round bar gauge gives a local reading, and the bowl separates water from the supply.
Point-of-use regulation for the gripper and small-cylinder circuit of a pick-and-place cell, with the 1/4 in NPT port matching the machine drop lines and the 40 um filtration protecting the fine control valves downstream.
The real, decodable choices on this unit are the size and port (200 frame, 1/4 in NPT), the drain (differential-pressure here; automatic and manual are options on other codes), the filter grade (40 um standard; 5 um with code W), the gauge (round with bar scale here; embedded square gauges and MPa or psi scales are alternatives), the thread (NPT here; PT is the standard and G is an order option), and the bracket (omitted on this code). The low-pressure regulator type is selected where the circuit runs at gentler settings than the standard type; its exact regulation range is not published here. Because flow is given only as curves and not as a single rating, send us your line pressure and flow requirement and we will confirm suitability against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Send us your line size and required flow and we will confirm the datasheet curve for the GFR200 against your application before you order.
The code reads as the GFR filter regulator in size 200 with a 1/4 in port, the low-pressure regulator type (L), no mounting bracket (J), a round external pressure gauge (C) on the bar scale (3), and NPT thread (T). The drain is the differential-pressure type and the filter element is the 40 um standard; 5 um filtration, other drains, gauges and threads are available on other codes in the family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.