The AirTAC GFR200C08LJF2W AirTAC Filter Regulator 1/4 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08LJF2W is a GFR-series filter regulator: it removes water and particulate from compressed air and holds a regulated downstream pressure in one compact body. This 200-size unit is fitted with a 1/4 in PT port, the 5 um filter element (code W), the differential-pressure drain, a low-pressure regulator and an embedded square gauge reading in psi; no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
It is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and options for automatic or manual drains, 40 um or 5 um elements, gauge style and scale, G or NPT threads and a mounting bracket. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure against your application.
| Model | GFR200C08LJF2W AirTAC Filter Regulator 1/4 in PT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a packaging line's case sealer, the unit dries and filters the air feeding the flap-tuck and pressing cylinders and holds a low, steady set pressure so jaw action stays repeatable.
Feeding the pilot valves of a rotary labeler, the 5 um element keeps water and sludge out of the valves while the regulator holds the low control pressure the applicator heads expect.
On a bench that leak- or pressure-tests small devices, the low-pressure regulator lets an operator dial in gentle set pressures while the 5 um element protects the test manifold from particulates.
Choose the size by port and flow: this 200-size unit carries a 1/4 in PT port, while 300, 400 and 600 sizes step up in port and flow capacity. The 5 um element suits air that feeds sensitive valves and instruments; the standard 40 um element is the general-purpose choice. This is the low-pressure regulator type, intended for lower set pressures - its exact range is not published, so confirm it with us before ordering. The differential-pressure drain expels condensate automatically as flow passes the element; automatic and manual drain variants exist in the family. The gauge here reads in psi (MPa and bar scales are available), the thread is PT as standard with G and NPT as order options, and a mounting bracket can be ordered separately. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
With no drain letter in the code, this unit uses the differential-pressure drain, which expels collected condensate automatically as air flows across the filter element. Automatic (A) and manual (M) drain variants can be ordered within the GFR family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.