The AirTAC GFR200C08MC1WT AirTAC Filter Regulator NPT1/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MC1WT is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit carries a 1/4 in NPT port, a 5 um filter element (the finer of the two catalogue grades), a manual drain for emptying the bowl, and a round pressure gauge with an MPa scale so the set point can be read at a glance. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi) with this manual-drain configuration, and the maximum inlet pressure is 1.0 MPa (145 psi). The bowl on this size is polycarbonate, and the unit is rated for -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and can be ordered with a 40 um or 5 um element, differential-pressure, automatic or manual drain, square or round gauge in MPa, psi or bar scales, a reverse/check valve, G or NPT threads in place of the PT standard, and with or without a mounting bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C08MC1WT AirTAC Filter Regulator NPT1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated air to the tool-change and clamping circuits of a CNC machining center, where the 5 um element helps protect solenoid valves from water and fine particulate carried in shop air.
Regulating supply pressure to pneumatic cylinders and divert valves on a bottling or filling line, with the round MPa gauge letting technicians verify and adjust the set point during changeovers.
Conditioning the compressed air feed to lab analytical instruments or sample-handling pneumatics, where the 5 um grade and a manually drained bowl keep the point-of-use supply clean and at a stable pressure.
Start with the port step: this unit is size 200 with a 1/4 in NPT port, and the GFR range steps up through sizes 300, 400 and 600 to 1 in as your air demand grows. Choose the drain to match the installation: manual drain (as fitted here) suits attended positions where an operator can bleed the bowl; automatic or differential-pressure drain suits unattended or hard-to-reach points. This unit carries the 5 um (code W) element instead of the 40 um standard, which is the choice when downstream valves and actuators need finer filtration. The round gauge with MPa scale is fitted; square embedded gauges and psi or bar scales are the alternatives. PT is the standard thread and G (BSPP) or NPT are catalogue options - this unit is ordered with NPT. A mounting bracket is included; the reverse/check valve is not fitted.
One honest note before you order: AirTAC publishes filter-regulator flow as curves, not as a single rated number, so we cannot quote a rated flow figure here. Send us your application details and we will confirm the sizing against the datasheet curves on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator performance as flow curves rather than a single rated figure, so we do not state a rated flow, Cv or SCFM number for this unit. Tell us your application - inlet pressure, set pressure and the air demand of the equipment downstream - and we will confirm the sizing against the datasheet curves on request.
The M in the code GFR200C08MC1WT specifies a manual drain: collected condensate is emptied by hand rather than automatically. It suits attended installations such as machine frames and workbenches where an operator can bleed the bowl as part of routine checks. For unattended or hard-to-reach points, the same family can be ordered with an automatic or differential-pressure drain instead - note that the manual-drain version also carries the wider 0.05-0.9 MPa (7-130 psi) regulation range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.