The AirTAC GFR200C08MF2G AirTAC Filter Regulator G1/4, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MF2G is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one body. This configuration is built around a G1/4 (BSPP) port, a manual drain on the 40 um filter bowl, an embedded square gauge reading in psi, and the standard regulator with an adjustment range of 0.05-0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), the polycarbonate bowl suits this 200 size, a mounting bracket is included, and no reverse (check) valve is fitted.
This is a genuine AirTAC part from the GFR range, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, drain choices (differential-pressure, automatic or manual), an optional 5 um element, gauge scale options and G/NPT thread variants. AirTAC publishes flow as curves rather than a single rated figure, so ask us to confirm flow and datasheet details for your application before ordering.
| Model | GFR200C08MF2G AirTAC Filter Regulator G1/4, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding the pneumatic clamps and tool-change cylinders on a machining center, where filtered air and a steady regulated pressure support the clamping sequence.
Conditioning the air that drives filler-head and capping cylinders on a bottling line, with the manual drain emptied as part of scheduled line cleaning.
Supplying the stop-and-divert gate cylinders on a parcel sortation conveyor, where the regulator holds one consistent pressure setting across the shift.
The real choices in this family are the size and port step (200/300/400/600 with 1/8 to 1 inch ports, matched to the air demand of the circuit), the drain type (manual here; automatic and differential-pressure are the alternatives), the filter element (40 um standard, 5 um with code W), the gauge scale (MPa, psi or bar), and the thread (PT standard, with G or NPT as order options). A J code removes the bracket, which is otherwise included. Because AirTAC publishes flow as curves rather than one rated number, send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm the flow from the datasheet on request.
This unit has a manual drain: the bowl is emptied by hand as part of routine maintenance. AirTAC also offers automatic and differential-pressure drains on GFR units, and the regulation range differs by drain type - 0.05-0.9 MPa (7-130 psi) with manual drain, or 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.