The AirTAC GFR200C08MF2WG AirTAC Filter Regulator G1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MF2WG is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one compact body. This configuration is built around a G1/4 (BSPP) port, a 5 um filter element (code W, against the 40 um standard), a manual drain on the bowl, and an embedded square gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), the polycarbonate bowl suits this 200 size, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans four sizes (200, 300, 400 and 600) with ports from 1/8 to 1 inch, and options that include automatic, manual or differential-pressure drains, 40 um or 5 um filtration, square or round gauges with MPa, psi or bar scales, a reverse/check valve, G or NPT threads, and bracket choices. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Because flow is published as curves rather than a single rating, we confirm the datasheet figures for your application on request.
| Model | GFR200C08MF2WG AirTAC Filter Regulator G1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds clean, pressure-regulated air to the clamp and vice cylinders on a machining centre, with the 5 um element helping keep fine particles out of the clamp valves and the square psi gauge giving the setter a direct readout of clamping pressure.
Sits at the drop point feeding the stop, divert and push cylinders on a packaging conveyor, removing condensed water and particulate before the directional valves and holding a steady setpoint so product handling stays repeatable through the shift.
Prepares the air line ahead of spray guns and air-assisted applicators: the 5 um grade strips water and fine dirt from the supply, and because a GFR unit combines only filtration and regulation, no oil mist is added to the air reaching the finish.
The first choice is size: 200, 300, 400 and 600 step up in port and flow capacity, so match the size to the air your circuit actually uses - this 200-size unit carries a G1/4 port. Then set the drain: manual (as here) needs someone to open the drain valve, automatic drains without attention, and the differential-pressure default drains on a pressure drop. Choose 40 um for general protection or 5 um (this unit) for finer downstream cleanliness. Gauges come as the embedded square type with MPa, psi or bar scales, and threads can be ordered in PT (standard), G or NPT. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your working pressure and the air demand of your circuit, and we will confirm the flow and full datasheet figures for this unit on request before you order.
The bowl on this configuration has a manual drain: someone opens it to expel the water and contaminant that collect inside. Choose manual where the unit is accessible and attended on a regular routine; choose automatic for unattended duty, or the differential-pressure default where draining on a pressure drop suits the circuit. With a manual drain, the regulator adjustment range is 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.