The AirTAC GFR200C08MF2WT AirTAC Filter Regulator NPT1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MF2WT is a size-200 filter regulator: it removes water and particulate from compressed air and sets downstream pressure in a single body. This configuration carries 1/4 in NPT ports, a 5 um filter element (the finer W grade, against the 40 um standard), a manual drain for emptying the bowl, an embedded square gauge reading in psi, and a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range. A mounting bracket is included and no reverse/check valve is fitted.
This is a genuine AirTAC part in the GFR200 size class, one of four sizes (200/300/400/600) that step up in port size and flow capacity, with options across thread (PT standard, G and NPT to order), drain type (differential-pressure, automatic or manual), filter grade and gauge scale. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures against your application before ordering.
| Model | GFR200C08MF2WT AirTAC Filter Regulator NPT1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the tool-clamp and chip-clearing circuits on a CNC machining centre, with the 5 um element protecting the clamp cylinder's seals from fine particulate and the manual drain bled at shift start.
Sits at the drop of a packaging line to supply the tape-head and flap-tuck cylinders, holding a steady set pressure so case closure stays consistent through the shift while the square psi gauge gives operators a local reading.
Prepares air for the fill-and-capper actuation circuits at a bottling station, catching water carried over from the compressor and letting maintenance drain the bowl manually during scheduled changeovers.
Start with the port step: size 200 with 1/4 in NPT ports suits compact point-of-use supplies, while 300/400/600 cover larger ports and higher demand - match the size to the air consumption of the circuit rather than the pipe alone. Choose the drain to suit access: this unit has a manual drain, so someone must bleed the bowl periodically; automatic or differential-pressure drains suit unmanned installations. The 5 um W element here is the finer option over the 40 um standard - specify it when downstream valves or instruments need cleaner air. The square psi gauge is fitted; MPa and bar scales and an external round gauge are alternatives. PT is the standard thread, with G (BSPP) and NPT as catalogue options - order the suffix you need. A bracket is included; J-coded variants omit it. Flow is published as curves, not a single rating, so send us your demand figures and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so there is no one figure we can quote honestly. Send us your line's air demand and we will confirm the flow from the datasheet curves for this 1/4 in NPT, size-200 unit before you order.
W selects the 5 um filter element instead of the 40 um standard. The finer element removes smaller particulate, which suits downstream directional valves, cylinders and instruments that are sensitive to contamination. The trade-off is that the element loads faster, so with this unit's manual drain and bowl you should inspect it as part of a regular maintenance routine.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.