The AirTAC GFR200C08MF2WTK AirTAC Filter Regulator NPT1/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MF2WTK is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the 200 size with a 1/4 in NPT port, 5 um filtration (the finer W grade instead of the standard 40 um element), a manual drain bowl, an embedded square gauge reading in psi, a fitted reverse/check valve, and the included mounting bracket. Max inlet pressure is 1.0 MPa (145 psi) and the standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge scale, thread (PT standard, G and NPT as order options), bracket and check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MF2WTK AirTAC Filter Regulator NPT1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Cleaned and regulated air for a directional-valve manifold on an assembly station: the 5 um element protects spool clearances, the psi gauge gives the setter a direct reading, and the check valve holds downstream pressure if upstream supply dips.
Point-of-use conditioning ahead of a machining centre's pneumatic clamps and tool-change cylinders, where the 1/4 in NPT port ties into the machine's drop and the manual drain is bled during scheduled maintenance.
Regulated air to conveyor stopper and gating cylinders on a packaging line, with the 5 um grade keeping moisture and fines out of compact actuators and the square psi gauge letting line staff verify set pressure at a glance.
Step up or down through the GFR sizes (200/300/400/600) to match the port and the flow your line needs - here the 200 size with a 1/4 in NPT port suits compact drops and point-of-use regulation. The 5 um W-grade element is the right pick where downstream valves or instruments tolerate less particulate than the standard 40 um element allows. The manual drain means an operator opens the bowl drain periodically - choose the automatic or differential-pressure drain variant instead if the unit sits where regular bleed-off is impractical. The square gauge is fitted here reading in psi; MPa and bar scales and an external round gauge are alternatives. Thread is NPT on this code; PT is the catalogue standard and G (BSPP) is also orderable. Bracket included; the K code adds a reverse/check valve. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the relevant flow/datasheet figures for the GFR200 size on request before you order.
The M in the code specifies a manual drain bowl: an operator opens the drain periodically to remove collected condensate. If the unit will be mounted where regular bleed-off is impractical, the same GFR200 size is orderable with an automatic drain (code A) or the default differential-pressure drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.