The AirTAC GFR200C08MJC1TK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJC1TK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration has 1/4 in NPT ports, a 40 um standard filter element, a manual drain on the polycarbonate bowl, and a round pressure gauge scaled in MPa. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi), a built-in check valve is fitted, and no mounting bracket is supplied. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch. Other catalogue options include automatic or differential-pressure drains, a 5 um (W) element, square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads, and brackets. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MJC1TK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning ahead of spray guns and air-assisted applicators, where water and particle removal plus a set regulated pressure keep finish quality consistent through the shift.
Conditioning and regulation of the air feeding pick-and-place cylinders and sealing jaws on a cartoning or wrapping line, with the manual drain emptied during scheduled changeover.
Filtered, regulated air for tool-change actuators, air bearings and clamping circuits on a machining centre, with the check valve holding the downstream circuit if supply pressure dips.
Start with the port: this unit is 1/4 in NPT, and the GFR series steps up through 3/8, 1/2, 3/4 and 1 inch as the size moves from 200 to 600, so pick the size that matches your line's flow demand. Drain choice matters: the manual drain on this unit suits attended installations, while automatic or differential-pressure drains suit unattended duty. The 40 um element is standard; specify the 5 um (W) grade where downstream equipment needs finer filtration. Gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket availability are all decodable from the code. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The M in the code specifies a manual drain, so condensate is emptied by hand from the bowl - a good fit for attended lines with regular maintenance. The same GFR200 body is available with an automatic (A) or differential-pressure (blank) drain if you need unattended water removal.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.