The AirTAC GFR200C08MJC2K AirTAC Filter Regulator 1/4 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MJC2K is an AirTAC GFR200 filter regulator: one body that strips water and particulate from compressed air and holds downstream pressure at your setpoint. This configuration is a 1/4 in PT port unit with a manual drain, a 40 um filter element, a round pressure gauge reading in psi, and a built-in reverse (check) valve. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), operating temperature is -5 to 70 C (non-freezing), and the 200-size bowl is polycarbonate. No mounting bracket is included with this code.
This is a genuine AirTAC part. The GFR family runs from size 200 to 600 with ports from 1/8 to 1 in, and other codes offer automatic or differential-pressure drains, a 5 um element, G or NPT threads, embedded square gauges and MPa or bar scales. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MJC2K AirTAC Filter Regulator 1/4 in PT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Clean, regulated air to a small pneumatic press or clamping fixture on an assembly cell, where steady downstream pressure keeps cycle-to-cycle forming consistent and the 40 um element protects the valve train.
Feeding pick-and-place and sealing cylinders on a packaging conveyor, with the built-in check valve holding the set pressure if the upstream supply dips mid-cycle.
Conditioning shop air for a laboratory or test rig, where water and particulate must be stripped before the supply reaches instruments, air bearings or sensitive actuators.
Choose by size and port first: the 200/300/400/600 steps pair with 1/8 to 1 in ports, and the right step depends on the flow your line needs - we can check the published curves against your demand. Drain type matters: this code is manual (M), so someone bleeds the bowl by hand; automatic (A) and the default differential-pressure drain suit unattended installations. Filter grade is 40 um standard; order the W variant for 5 um where finer particulate removal matters. Gauge: this unit carries a round gauge scaled in psi; embedded square gauges and MPa or bar scales exist on other codes. Thread is PT as standard, with G (BSPP) and NPT as order options, and this code has no mounting bracket. Ask us to confirm sizing against the datasheet curves before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Flow for this unit is published as curves, not a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the datasheet flow figures and check whether the 1/4 in port suits your air demand before you order.
This code carries the M drain option: collected water is bled from the bowl by hand, so someone needs to check it as part of routine maintenance. If the installation is unattended, the same body is available with an automatic drain (A) or the differential-pressure drain fitted as standard on other codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.