The AirTAC GFR200C08MJC2WG AirTAC Filter Regulator 1/4in G, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MJC2WG is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure at your setpoint. This configuration has a G1/4 (1/4 in) port with G (BSPP) thread, a 5 um filter element (code W), a manual bowl drain, and a round pressure gauge reading in psi. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) setting range, maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and no bracket or reverse/check valve is fitted.
It is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with 40 um or 5 um filtration, differential-pressure, automatic or manual drains, embedded square or external round gauges in MPa, psi or bar scales, G or NPT threads in place of the PT standard, and an optional mounting bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C08MJC2WG AirTAC Filter Regulator 1/4in G, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clamp and hold-down cylinders on a fixture: the 5 um element strips water and swarf carried in shop air, while the regulator holds a steady clamp pressure so cycle positioning stays repeatable. The round psi gauge lets an operator verify the setpoint at a glance.
Placed at the drop ahead of spray guns on a finishing line: the 5 um grade catches fine particulate that would blemish a finish, and the regulator holds a stable gun supply pressure. The manual drain suits a booth where an operator bleeds the bowl during shift checks.
Supplying pilot and signal air to solenoid and air-piloted valves on a packaging machine: clean, regulated air at a fixed pressure keeps valve shifting consistent and protects internal seats from water and grit, with the psi gauge giving a visible reference during setup.
Size and port step up from 200 through 600 as flow demand grows; this unit is size 200 with a 1/4 in G-thread port. Choose the drain to match service: manual (as here) where the unit is accessible and checked routinely, automatic or differential-pressure where it is hard to reach. Filter grade is 40 um standard, 5 um (this unit) for finer protection of downstream equipment. Gauges are an embedded square type as standard or an external round gauge in MPa, psi or bar; this unit carries a round gauge with psi scale. Thread is PT as standard with G and NPT as order options, and a bracket is optional (not fitted here). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves, not as a single rated figure, so we do not quote a rated flow number for this unit. Send us your line pressure, port size and application details and we will confirm the sizing and datasheet figures on request before you order.
Manual drain means collected water is expelled by opening the drain by hand, so it suits positions that are accessible and checked routinely. Where a unit is mounted high or in a cramped position, choose the automatic or differential-pressure drain version instead. This GFR200C08MJC2WG is the manual-drain, 5 um, round psi gauge configuration on a G1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.