The AirTAC GFR200C08MJF1TK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJF1TK is a size 200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 1/4 in NPT port, a 40 um standard filter element, a manual drain on the bowl, an embedded square gauge scaled in MPa, a built-in reverse/check valve, and no mounting bracket. With manual drainage the regulated outlet is adjustable over 0.05-0.9 MPa (7-130 psi), and the maximum working (inlet) pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drainage, a 5 um (W) filter element option, gauge scale options and G/NPT thread variants. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C08MJF1TK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding the air cylinder of a bench-top press: the 40 um element keeps machining swarf and condensed water out of the cylinder seals, while the regulator holds a steady set pressure so cycle force stays repeatable, and the check valve holds the circuit if upstream supply dips.
Supplying the air to gate and stopper cylinders that divert bottles between lanes: clean, regulated air at a set pressure gives consistent gate actuation, the MPa gauge lets the line technician read and lock the setting, and the manual drain suits a shift-start maintenance routine.
Mounted at the wall drop feeding a small fabrication-shop plasma cutter or spray gun: the filter stage strips water and pipe scale before the tool, the regulator lets the operator set working pressure per job, and the 1/4 in NPT port matches common workshop fittings.
Size 200 with a 1/4 in NPT port suits compact point-of-use supply; step up to size 300, 400 or 600 when the line demands a larger port and more flow. Drainage here is manual, so an operator drains the bowl on a routine; choose automatic or differential-pressure drainage in the same series if the unit sits where regular manual draining is impractical. The 40 um element is the standard grade; specify the 5 um (W) option if downstream equipment needs finer filtration. The fitted square gauge reads in MPa, with psi and bar scales and an external round gauge available as options. NPT is the thread on this unit; G (BSPP) and PT variants exist in the catalogue, and the bracket is omitted on this code but optional in the series. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated number, so we do not quote a l/min or SCFM figure here. Tell us your application and we will confirm the relevant datasheet flow figures on request before you order.
The M in the code sets manual drainage: an operator opens the bowl drain to discharge collected water, which suits stations visited on a regular maintenance round; automatic and differential-pressure drain versions exist in the same series. The K code means a reverse/check valve is fitted, which blocks reverse flow through the unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.