The AirTAC GFR200C08MJF2G AirTAC Filter Regulator G1/4, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJF2G is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is built with a G1/4 (BSPP) port, a manual drain on the bowl, a 40 um filter element, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), and an embedded square gauge reading in psi. No mounting bracket is fitted and no reverse/check valve is included.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, PT as the standard thread and G or NPT as catalogue options, a choice of manual, automatic or differential-pressure drains, and 40 um standard or 5 um (W) filtration. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MJF2G AirTAC Filter Regulator G1/4, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding pneumatic clamps and swing cylinders on a machining-cell fixture, where filtered air held at a set pressure keeps clamping force repeatable part after part.
Supplying the cylinder banks on a carton-forming and sealing conveyor, with the manual drain emptied at shift changeover to keep condensate out of the valves.
A filtered, regulated drop at a maintenance bench feeding air tools and test rigs, with the square psi gauge giving the technician a local pressure readout.
Start with the size step: 200 is the compact frame with a 1/4 in port, and 300, 400 and 600 step up in port and flow capacity - we confirm the exact figures from the datasheet on request. Drain type matters in service: this unit has a manual drain, so the bowl is emptied by hand; automatic or differential-pressure drains suit unattended installations. The 40 um element is the standard grade; specify W for 5 um where downstream equipment needs finer filtration. The embedded square gauge on this unit reads in psi; MPa and bar scales are available and an external round gauge is optional. Thread: this unit is G (BSPP); PT is the standard thread and NPT is an order option. No bracket is fitted (code J). Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one number we can quote. Send us your required flow and working pressure and we will confirm the sizing from the datasheet before you order.
The M in GFR200C08MJF2G specifies a manual drain: the bowl is emptied by hand, which suits attended cells with scheduled checks. Automatic (A) and differential-pressure (blank) drains are catalogue options on the same 200-size filter regulator where unattended drainage is needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.