The AirTAC GFR200C08MJF2TK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJF2TK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration is a 1/4 in NPT ported unit with a manual drain bowl, a 40 um standard filter element, an embedded square gauge reading in psi, a built-in reverse/check valve, and no mounting bracket. With manual drainage, the regulation range is 0.05-0.9 MPa (7-130 psi) and the maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR filter-regulator family, available in sizes 200, 300, 400 and 600 with a choice of ports, PT/G/NPT threads, manual, automatic or differential-pressure drains, a 40 um or 5 um element, and gauge or no-gauge options. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GFR200C08MJF2TK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning for a machine's control-air manifold: the 40 um element strips water and pipe scale before directional valves, and the regulator holds a stable setpoint read locally on the square psi gauge, with the check valve holding downstream pressure during supply dips.
Feeding cylinders and grippers on a packaging or cartoning conveyor, where clean, regulated air keeps stroke timing consistent; the manual drain is emptied during scheduled changeover stops, and the 1/4 in NPT port suits compact drop lines.
A bench- or cell-mounted supply point for impact wrenches, air ratchets and blow guns: the regulator lets the operator set tool pressure from the psi gauge, the filter removes compressor moisture before it reaches the tools, and the check valve prevents backflow through the drop.
Start with the port step: this unit is 1/4 in NPT, and the GFR range steps up through sizes 300, 400 and 600 for larger ports and higher flow demand - match the size to the air consumption of the circuit rather than oversizing on guesswork. Because this code carries a manual drain (M), the regulation range is the wider 0.05-0.9 MPa (7-130 psi); if your line cannot rely on operator draining, an automatic or differential-pressure drain variant may suit better. The 40 um element is the standard grade; specify the 5 um (W) option where downstream equipment needs finer filtration. The embedded square gauge here reads in psi, with MPa and bar scales and an external round gauge available as options. PT is the standard thread; G (BSPP) and NPT are catalogue options to order, as is the mounting bracket (this unit is supplied without one).
Flow for GFR units is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for GFR filter regulators as performance curves rather than a single rated figure, so we do not quote a Cv or flow number. Send us your application's air consumption and pressure requirements and we will confirm the sizing against the datasheet on request.
The M in the code specifies a manual drain: condensate collected in the bowl is released by operating the drain by hand, so it suits installations with regular maintenance access. On this manual-drain configuration the regulation range is 0.05-0.9 MPa (7-130 psi); automatic and differential-pressure drain variants have a 0.15-0.9 MPa (20-130 psi) range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.