The AirTAC GFR200C08MJF2W AirTAC Filter Regulator PT1/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
GFR200C08MJF2W is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation in a single body. This configuration is built with a PT1/4 (1/4 in) port, the optional 5 um filter element (W grade, against the 40 um standard), a manual drain, an embedded square gauge reading in psi, and the standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the size 200 bowl is polycarbonate (PC). No mounting bracket and no reverse/check valve are fitted on this code.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600, with a choice of port, thread (PT standard; G and NPT are order options), drain type, filter grade and gauge scale. Flow figures are published as curves rather than a single rating, so ask us to confirm datasheet figures for your application on request.
| Model | GFR200C08MJF2W AirTAC Filter Regulator PT1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use filter regulator ahead of a machine tool's solenoid valves and clamping cylinders, catching water and fine particles and holding a steady set pressure for repeatable clamping and tool-change actuation.
Filtered, regulated air for stopper cylinders, diverters and case ejectors on a packaging conveyor, where a stable setpoint keeps stroke timing consistent through the shift.
Clean, regulated supply for gripper circuits on a robotic pick-and-place cell; the 5 um element helps protect small pilot valves from particulate carryover, with the psi gauge giving operators a direct setpoint readout.
The real choices within GFR200 are the port step (1/4 in here; larger sizes carry larger ports and more flow), the drain type (manual as coded, or automatic or differential-pressure), the filter grade (5 um as coded here, or the 40 um standard), the gauge scale (psi here; MPa or bar also available), the thread (PT standard; G and NPT are order options) and whether a bracket is included. Size the port against the air demand of the machine rather than the pipe alone. Because flow is published as curves and not as a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator flow as characteristic curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow and sizing from the datasheet on request.
The W in the code selects the optional 5 um element instead of the 40 um standard, and M selects the manual drain, so condensate is emptied by hand rather than automatically. If your line runs unattended or carries a heavy condensate load, ask us about the automatic or differential-pressure drain variants of the same unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.