The AirTAC GFR200C08MJF2WG AirTAC Filter Regulator G1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJF2WG is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one compact body. This unit is built on the size 200 frame with a G1/4 (BSPP) port, a 5 um filtration element, a manual drain and an embedded square gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), the maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowl on the size 200 frame is polycarbonate (PC), and no mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options including differential-pressure, automatic or manual drains, 40 um or 5 um filtration, square or round gauges with MPa, psi or bar scales, PT, G or NPT threads, and optional brackets. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application.
| Model | GFR200C08MJF2WG AirTAC Filter Regulator G1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air to pneumatic clamps and tool-changers on a machining centre, where the 5 um element helps keep water and fine particulate out of close-tolerance valves and cylinders.
Steady downstream pressure for stoppers, pushers and diverters on a bottling or carton line, with the manual drain bled during routine shift checks.
Clean, regulated air to positioners and pilot valves on a process skid, with the psi square gauge giving a local setpoint readout at the panel.
Choose the size by port and flow: size 200 with a G1/4 port suits lighter-duty lines, while stepping up to 300, 400 or 600 gives a larger port and more flow. This unit already carries the 5 um (W) element - pick that grade where finer filtration matters, or the standard 40 um where it does not. Drain options are differential-pressure (default), automatic (A) or manual (M, as here); a manual drain needs periodic bleeding by hand. Gauge choices cover the embedded square gauge or an external round gauge, with MPa, psi or bar scales. Thread can be ordered as PT (the standard), G/BSPP (as this unit) or NPT, and brackets are optional. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure, set pressure and downstream demand, and we will confirm the sizing from the datasheet on request.
The M in this code selects a manual drain: water collected in the bowl must be bled off by hand at intervals. If you would rather have automatic or differential-pressure draining, both are available in the same family - ask us for the matching code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.