The AirTAC GFR200C08MJF2WT AirTAC Filter Regulator NPT1/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MJF2WT is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in a single body. This 200-size unit is threaded NPT1/4 (1/4 in), carries the 5 um filter element (code W) in place of the 40 um standard, and has a manual drain on the bowl, so condensate is emptied by hand on a routine schedule. The standard-type regulator adjusts from 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature is -5 to 70 C, non-freezing. A square gauge scaled in psi is built in, no mounting bracket is supplied (code J), and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and catalogue options include 40 um or 5 um filtration, differential-pressure, automatic or manual drains, square or round gauges scaled in MPa, psi or bar, G (BSPP), NPT or PT threads, and brackets. AirTAC publishes flow for this series as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR200C08MJF2WT AirTAC Filter Regulator NPT1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated air to solenoid valves and pneumatic actuators on a machining centre, where the 5 um element is the finer choice ahead of pilot valves and the regulator holds the circuit at its setpoint.
Supplying carton-sealing and case-packing cylinders on a packaging line, with the built-in psi square gauge giving operators a local setpoint reading and the manual drain emptied during scheduled changeovers.
Regulating air to diverter gates and stopper cylinders along a sorting conveyor, where the compact 200-size body sits close to the point of use on a 1/4 in NPT drop.
Choose the size by port and air demand: 200 is the compact step, here with a 1/4 in NPT port, while 300, 400 and 600 serve larger lines. This code pairs the 5 um element (W) with a manual drain (M), which suits points of use that are visited regularly; automatic and differential-pressure drain codes exist for bowls that cannot be checked often. The built-in square gauge is scaled in psi here, with MPa and bar scales and an external round gauge as alternatives. Thread is NPT on this code, with G (BSPP) and PT available to order, and J means no bracket is supplied. Flow for the GFR series is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves that vary with inlet pressure and setpoint, not as a single rated number, so we do not quote a figure here. Send us your line pressure, setpoint and expected air demand and we will confirm the sizing from the datasheet on request.
The M in the code sets a manual drain: condensate is emptied by hand, so the unit suits points of use checked on a routine schedule, while automatic and differential-pressure drain codes exist for bowls that cannot be visited often. The W code fits the 5 um element in place of the 40 um standard, the finer choice ahead of downstream pilot valves. Both are catalogue build options on the same GFR200 body.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.