The AirTAC GFR200C08MJNWT AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
GFR200C08MJNWT is an AirTAC GFR200 filter regulator: a single body that removes water and particulate from compressed air and holds downstream pressure at your set point. This configuration takes a 1/4 in NPT port and carries the 5 um filter element (code W, against the 40 um standard), with a manual drain, so condensate collected in the polycarbonate bowl is drained by hand. No gauge is fitted (code N), no mounting bracket is included, and no reverse/check valve is fitted. The standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) with a manual drain, maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with stepped ports, a choice of manual, automatic or differential-pressure drain, 40 um or 5 um filtration, gauge options and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet for this model before you size it.
| Model | GFR200C08MJNWT AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning for a small pneumatic press or clamping cylinder on an assembly bench, with the 5 um element protecting the valve and cylinder from water and particulate.
Filtered, regulated air ahead of spray guns or a coating line, where the fine 5 um grade and a steady set pressure support a consistent finish on each part.
Regulated supply to diverters, grippers and stopper cylinders on a packaging or conveyor line, with the manual drain suited to a checked shift routine.
Choose the GFR size by port and required flow: this unit is size 200 with a 1/4 in NPT port, and the larger 300/400/600 sizes step up in port and flow capacity. Drain type is a real choice: manual (this unit) suits installations with a checked drain routine, while automatic and differential-pressure versions drain themselves and carry a 0.15-0.9 MPa (20-130 psi) adjust range versus the 0.05-0.9 MPa (7-130 psi) range of this manual-drain unit. Filtration here is the fine 5 um grade; the standard grade is 40 um. Gauges with MPa, psi or bar scales, PT or G threads and mounting brackets are selectable across the series. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Ask us and we will confirm the datasheet curve for this size 200, 1/4 in NPT unit against your application before you order.
This configuration has a manual drain (code M), and the manual-drain adjust range is 0.05-0.9 MPa (7-130 psi). Versions with automatic or differential-pressure drain adjust from 0.15-0.9 MPa (20-130 psi); the drain type is a decodable choice on the model code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.