The AirTAC GFR200C08MLC2TK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLC2TK is an AirTAC GFR-series filter regulator: a 40 um particulate filter with water drain and a pressure regulator combined in a single body. This size-200 unit has a 1/4 in NPT port and is the low-pressure (L) regulator type, intended for circuits that hold reduced set pressures; its exact adjustment range is not published, and we confirm it from the datasheet on request. Water collected in the polycarbonate bowl is released by the manual drain (M), a round gauge reading in psi (C2) shows the setting at a glance, a reverse/check valve (K) is fitted, and a mounting bracket is included.
It is a genuine AirTAC part. The GFR family runs from size 200 to 600 with ports from 1/8 to 1 in, and options across the range include automatic or differential-pressure drains, a 5 um element (code W), embedded square or external round gauges with MPa, psi or bar scales, G (BSPP) or NPT thread, and bracket or no-bracket mounting. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures for your application.
| Model | GFR200C08MLC2TK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filter and step the supply down before the machine's directional valves and small cylinders; the manual drain lets an operator bleed accumulated water from the bowl at shift start.
Hold a reduced, stable set pressure on clamping circuits that must not run at full line pressure, while the 40 um element keeps particulates out of the clamp cylinders and valves.
Deliver filtered, regulated air to spray guns at a coating line; the round gauge reads the setting directly in psi and the built-in check valve blocks reverse flow if the upstream supply dips.
Choose the size by port and flow: size 200 with a 1/4 in port sits at the lighter end of the GFR range (300, 400 and 600 step up), but because flow is published as curves rather than a single rating, send us your flow demand and we will confirm the right size before you order. Drain choice: this unit has a manual drain (M), which an operator opens by hand; automatic (A) and differential-pressure (blank) drains are available on other codes if manual bleeding does not suit the installation. The filter grade here is the 40 um standard element; specify W for the 5 um option. The gauge fitted is the external round type reading in psi (C2); embedded square gauges and MPa or bar scales are alternatives. Thread: PT is the AirTAC standard and G (BSPP) and NPT are order options - this unit is ordered with NPT. The L code selects the low-pressure regulator type for circuits with reduced set pressures; its exact range is confirmed on request. A mounting bracket is included; specify J to omit it.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your required flow and line conditions and we will confirm the sizing from the datasheet on request.
The L in the code marks the low-pressure regulator type, and its exact adjustment range is not published in the catalogue material we transcribe. Tell us the set pressure your circuit needs and we will confirm suitability from the datasheet on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.