The AirTAC GFR200C08MLC2WT AirTAC Filter Regulator NPT1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body. This GFR200C08MLC2WT unit is the 200 size with a 1/4 in NPT port, a 5 um filter element for finer air cleaning than the standard 40 um grade, a manual drain on the metal bowl, and the low-pressure regulator type. It is fitted with an external round gauge reading in psi, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and each size can be ordered with a choice of drain type, filter grade, gauge style and scale, thread (PT standard, with G and NPT as options) and bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MLC2WT AirTAC Filter Regulator NPT1/4, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtering and regulating supply air to gripper and pilot-valve circuits on an assembly-line robot, with the 5 um element helping protect small valves from particulate and condensed water.
Supplying low-pressure clamping and hold-down cylinders on a carton-sealing line, where the low-pressure regulator type and round psi gauge support setting at reduced pressures.
Feeding filtered, regulated air to bench-top test rigs and fixtures, with manual drain for controlled, infrequent draining and a psi gauge that reads directly against US test specifications.
Choose the GFR size by port and demand: 200 is the compact step with a 1/4 in port on this unit, while 300, 400 and 600 carry larger ports for heavier circuits - match the published flow curve to your application before ordering. Drain type is a real choice: manual (this unit) is emptied by hand at intervals, automatic drains continuously, and the differential-pressure default drains on a pressure drop. Filter grade is 40 um standard or 5 um (code W, fitted here) for finer filtration. Gauge options are the embedded square gauge or an external round gauge in MPa, psi or bar scales - this unit carries the round psi gauge. Thread is PT as standard with G and NPT orderable; this unit is NPT. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow curve and sizing from the datasheet on request.
This unit's bowl has a manual drain: it is opened periodically to release collected water. The automatic-drain option (code A) ejects condensate without attention, and the differential-pressure default drains on a pressure drop. Manual suits installations that are checked regularly; choose automatic where the unit is hard to reach.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.