The AirTAC GFR200C08MLC2WTK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLC2WTK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size-200 unit has a 1/4 in NPT port, a 5 um filter element (code W), a manual drain, and the low-pressure regulator type for circuits that operate at reduced set pressures; the exact adjustment range for the low-pressure type is not published, so confirm it with us. A round gauge with a psi scale is fitted, a reverse/check valve is built in, and the metal bowl is emptied by hand during service. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include 40 um or 5 um filtration, manual, automatic or differential-pressure drains, embedded square or external round gauges with MPa, psi or bar scales, G, NPT or PT threads, and a reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GFR200C08MLC2WTK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds pneumatic hold-down clamps on a carton-sealing machine that are specified for reduced set pressures; the 5 um element keeps pilot air to the clamping valves clean, and the manual drain is emptied during shift checks.
Supplies filtered, regulated low-pressure air to air knives that dry bottles before labelling; the round psi gauge lets an operator read the set point at the machine, and the built-in check valve stops backflow through the unit.
Filters and regulates supply air to work-holding fixtures on a PCB test bench, where the low-pressure regulator type matches modest set pressures and the metal bowl is drained by hand at scheduled maintenance.
The real choices in this family are the size and port step (200/300/400/600, ports from 1/8 to 1 in) matched to the flow your line needs; the drain type (manual here, or automatic or differential-pressure); the filter grade (40 um standard, 5 um with code W, as fitted to this unit); the gauge (embedded square as standard, or an external round gauge in MPa, psi or bar scales - this unit carries a round psi gauge); the thread (PT is the standard, G and NPT are order options - this unit is NPT); and the bracket, which is included here. The low-pressure regulator type (code L) is the other decodable choice. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so no one number is quoted here. Send us your line pressure, port size and air demand and we will confirm sizing from the datasheet on request.
This unit is coded M for a manual drain: the metal bowl is emptied by hand at service intervals, which suits attended machines. The same size is available with an automatic or a differential-pressure drain instead. Note that for this low-pressure regulator type the exact adjustment range is not published, so confirm it with us when selecting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.