The AirTAC GFR200C08MLF2WT AirTAC Low-Pressure Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
GFR200C08MLF2WT is an AirTAC GFR200 low-pressure filter regulator: it removes water and particulate from compressed air and holds downstream pressure in a single body. This configuration is built with a 1/4 in NPT port, a 5 um filter element (the W grade, finer than the standard 40 um), a manual drain, an embedded square gauge reading in psi, and the mounting bracket included. No reverse (check) valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 in, plus drain, filter-grade, gauge-scale and thread options to match the line. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and the low-pressure adjustment range against your application before ordering.
| Model | GFR200C08MLF2WT AirTAC Low-Pressure Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Gripper and suction circuits that run below standard line pressure suit a low-pressure regulator type, and the 5 um element keeps fine debris out of pilot valves on the cell.
Bench setups that need clean, gently regulated air benefit from the fine 5 um element and a manual drain that lets an operator clear collected water at the start of each session.
Combining filtration and regulation in one body saves panel space on packaging and conveyor control circuits, with the square psi gauge giving a direct local pressure readout.
Choose the size by the flow your line needs: size 200 with a 1/4 in port is the compact step, while 300, 400 or 600 give larger ports for higher demand - we read the exact duty off the published flow curves with you. Drain comes as manual (this unit), automatic or differential-pressure; pick manual where someone checks the bowl routinely, automatic where the unit is hard to reach. Filtration is 40 um standard or 5 um with the W code, as fitted here. Gauges are embedded square as standard with an optional external round gauge, in MPa, psi or bar scales. Thread is PT as the catalogue standard, with G (BSPP) and NPT as order options - this unit is NPT. Flow is published as curves, not a single rating, so ask us to confirm sizing against the application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and air demand and we will confirm the flow from the datasheet for this exact configuration on request.
The L code makes this a low-pressure regulator type rather than the standard version. The exact adjustment range for the low-pressure type is not published in the standard tables, so we confirm the range against your set pressure before you order. Everything else on this unit - 1/4 in NPT port, 5 um element, manual drain, square psi gauge - decodes as listed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.