The AirTAC GFR200C08MLJC2G AirTAC Filter Regulator G1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLJC2G is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration is decoded as a G1/4 (1/4 in) G-thread port in the compact size 200 frame, a manual drain for periodic bowl draining, a 40 um standard filter element, the low-pressure regulator type, a fitted round gauge reading in psi, no mounting bracket, and no reverse/check valve. It is rated for a maximum inlet pressure of 1.0 MPa (145 psi) and operating temperatures of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and is offered with manual, automatic or differential-pressure drains, a 40 um standard or 5 um (W) fine element, embedded square or external round gauges in MPa, psi or bar scales, optional brackets, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C08MLJC2G AirTAC Filter Regulator G1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, low-pressure regulated air feeding the clamp and hold-down cylinders on a carton-sealing or case-packing line, where the manual drain is checked during scheduled changeovers.
Conditioning air at a paint or coating booth: the 40 um element removes water and particulate ahead of the gun while the low-pressure regulator holds a gentle, stable setting at the manifold.
Supply point for pneumatic diverters, stops and pushers along a conveyor line, giving operators a visible psi reading at the drop and a manual drain point at each conditioned branch.
Start with the port step: size 200 with a G1/4 port suits lines plumbed at 1/4 in; step up to GFR300/400/600 when the circuit moves to 3/8, 1/2 or larger. Choose the drain to match maintenance habits: this unit has a manual drain, so someone must drain the bowl periodically; automatic or differential-pressure drains are available if the unit will be left unattended. The 40 um element fitted here is the standard grade; specify the W option for 5 um fine filtration. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are alternatives. This is the low-pressure (L) regulator type for circuits regulated well below standard settings - confirm the exact range with us before ordering. Thread is G here; PT is the standard and NPT is an orderable option. A mounting bracket is not included with this code but is optional in the series. Flow is published as curves, not a single rating, so send us your application and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a l/min or SCFM figure. Send us your application - inlet pressure, regulated setting and the cylinders or tools being fed - and we will confirm the sizing from the datasheet on request.
The L code marks the low-pressure regulator variant, intended for circuits regulated well below standard settings; the exact range is not published, so confirm it with us before ordering. The M code means the bowl is drained by hand at intervals - choose an automatic (A) or differential-pressure drain code instead if the unit cannot be serviced regularly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.