The AirTAC GFR200C08MLJC2WGK AirTAC Filter Regulator G1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MLJC2WGK is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is sized GFR200 with G1/4 (BSPP) ports, carries a 5 um filter element (code W), a metal bowl with manual drain, and a low-pressure regulator fitted with an external round gauge scaled in psi. A reverse/check valve (code K) is fitted, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, offered with a choice of drain type, 40 um or 5 um filtration, gauge style and scale, PT, G or NPT threads, and bracket options. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and full datasheet figures for your application.
| Model | GFR200C08MLJC2WGK AirTAC Filter Regulator G1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air for the clamp and hold-down cylinders on a packaging machine's sealing station, where the low-pressure regulator lets the line set a gentle, repeatable clamp force and the 5 um element helps protect the valve seals from water and particulate.
Feeding spray guns in a paint or coating booth: the 5 um element keeps water and particulate out of the finish, while the regulator holds a steady gun pressure and the round psi gauge gives the operator a readable setpoint at the booth.
Low-pressure actuation of pneumatic clamps on an electronics assembly cell, where delicate boards call for finely filtered air and a conservatively set regulator rather than full line pressure.
The real choices in this family are the size and port step, the drain type, the filter grade, the gauge and its scale, the thread, and the bracket. Step up from GFR200 with G1/4 to GFR300, GFR400 or GFR600 when the line needs larger ports; choose the 5 um element (this unit, code W) when downstream equipment needs finer filtration than the 40 um standard; and pick automatic, manual or differential-pressure draining to suit how often the bowl will be attended - here it is manual, so plan to drain it during routine checks. Gauges are either the embedded square type or an external round gauge in MPa, psi or bar; this unit carries a round psi gauge. Threads are PT as standard with G and NPT as order options - this unit is G.
Flow is published as curves, not a single rated figure, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and full datasheet figures for the GFR200C08MLJC2WGK on request before you order.
The L code marks this unit as the low-pressure regulator type rather than the standard version, intended for circuits run well below full line pressure. Its exact adjustment range is not published in the catalogue, so confirm the range you need with us before ordering. The manual drain, 5 um filtration, round psi gauge and fitted reverse/check valve are unchanged, and maximum inlet pressure remains 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.