The AirTAC GFR200C08MLJC2WTK AirTAC Filter Regulator 1/4in 5um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLJC2WTK is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and then regulates the pressure delivered downstream. This configuration is built on the GFR200 size with a 1/4 in NPT port, a 5 um filter element (the finer of the two published grades), a metal bowl with a manual drain, and the low-pressure regulator type. A round psi gauge is fitted, a reverse/check valve is installed, and the unit is supplied without a mounting bracket. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans the 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and options for drain type (differential-pressure, automatic or manual), 40 um or 5 um filtration, gauge style and scale, PT, G or NPT thread, bracket, and reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR200C08MLJC2WTK AirTAC Filter Regulator 1/4in 5um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated air to the tool-changer clamps and pneumatic valves on a CNC machining cell, where the 5 um element helps keep fine debris out of the machine's control valves and the psi gauge gives operators a local pressure readout.
Conditioning the air supply to sealing jaws and pick-and-place cylinders on a packaging line, combining water and particulate removal with pressure regulation in a single 1/4 in unit mounted at the line drop.
Supplying clean, regulated air to the diverter gates and stopper cylinders on a warehouse sorting conveyor, where the manual drain lets maintenance staff bleed accumulated condensate during scheduled rounds.
Choose the size by port and flow demand: GFR200 carries a 1/4 in port, with the 300, 400 and 600 sizes stepping up to larger ports and higher flow. Drain: this unit has a manual drain, which you bleed by hand; automatic and differential-pressure drains are available in the family if you want unattended condensate removal. Filtration: 5 um here versus the 40 um standard element - pick 5 um where downstream valves and instruments need finer air. Gauge: a round psi gauge is fitted; an embedded square gauge and MPa or bar scales are the alternatives. Thread: NPT here, with PT as the standard option and G also orderable. No mounting bracket is included. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet figures for the GFR200 at the 1/4 in NPT port before you order.
The M in the code sets a manual drain: condensate collects in the metal bowl and you drain it by hand as part of routine maintenance. If your installation cannot rely on regular checks, the same size is available with an automatic or a differential-pressure drain - ask us and we will quote that variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.