The AirTAC GFR200C08MLJC3TK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR series combines two jobs in one body: a filter element that strips water and particulate from compressed air, and a regulator that sets downstream pressure. This unit is the size 200 frame with a 1/4 in NPT port, a 40 um standard element and a metal bowl with a manual drain, so condensate is released by hand during routine checks. The L code makes it a low-pressure regulator type, it carries a round gauge reading in bar, and a reverse/check valve is fitted; no mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600 with port sizes from 1/8 to 1 in, a choice of PT, G or NPT thread, manual, automatic or differential-pressure drains, a 5 um (W) element option and gauge variants. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR200C08MLJC3TK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Clean, regulated air ahead of solenoid valve manifolds on an assembly line, keeping water and particulate out of the valves while holding a steady low-pressure setting for the circuit.
Feeding low-pressure air to grippers and small cylinders on a robotic handling cell where the setpoint sits below what a standard regulator type is intended for.
Supplying filtered air to blow-off nozzles and sorting jets on a packaging conveyor, with the manual drain suiting a supervised line that gets a daily check routine.
Work through the decodable choices in order. Step up through sizes 200, 300, 400 and 600 as your port size and air demand grow; this unit is the smallest frame with a 1/4 in NPT port. Choose the drain to match supervision: manual (this unit) for a hands-on check routine, automatic or differential-pressure where hands-off draining is wanted. Keep the 40 um element for general shop air, or order the W variant for 5 um filtration. Gauge scale (MPa, psi or bar), thread (PT is the standard code, with G and NPT as order options) and bracket are all set in the code. Because AirTAC publishes flow as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your inlet pressure and the air demand of the circuit, and we will confirm the sizing from the datasheet on request.
The M in the code sets a manual drain: condensate collected in the bowl is released by hand, which suits supervised installations with a routine check. Automatic and differential-pressure drains are available as separate order codes in the same family; ask us to identify the variant you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.