The AirTAC GFR200C08MLJF2 AirTAC Filter Regulator PT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MLJF2 is a GFR-series filter regulator: it removes water and particulate from compressed air and reduces pressure to the working set-point in one compact body. This 200-size unit is fitted with PT1/4 (1/4 in) ports, a manual drain on its polycarbonate (PC) bowl, a 40 um standard filter element, and an embedded square gauge scaled in psi. It is the low-pressure type, intended for circuits set below the standard adjustment band; the exact adjustment range is not published in our datasheet, so confirm it with us. No mounting bracket is supplied and no reverse/check valve is fitted. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans the 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um (code W) filtration, embedded square or optional external round gauges with MPa/psi/bar scales, and G or NPT thread options to order. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and the full datasheet for your application before ordering.
| Model | GFR200C08MLJF2 AirTAC Filter Regulator PT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a glue, sealant or coating line where dispense heads need a gentle, stable supply pressure, this low-pressure-type filter regulator cleans the air and holds the reduced set-point, with the square psi gauge giving a direct readout at the machine.
Pneumatic clamps and hold-downs on a machining fixture need clean, moisture-free air at a set pressure. This unit filters water and particulate at the fixture drop and lets an operator dial in the clamping pressure, draining the manual bowl during scheduled stops.
Filling, sealing and labelling stations on a packaging line run on 1/4 in air drops. A filter regulator at each station keeps water and debris out of valves and cylinders and lets each station run at its own pressure, with manual draining tied into maintenance rounds.
The real, decodable choices in this family are the size and port step (200 to 600, 1/8 to 1 in) matched to the air demand of your circuit; the drain type (manual, automatic or differential-pressure - this unit is manual, so the bowl must be drained by hand at intervals); the filter grade (40 um standard, 5 um with code W for finer protection); the gauge (embedded square as fitted here, optional external round, scales in MPa, psi or bar); and the thread (PT is the standard, with G and NPT available as order options). A mounting bracket is optional. Because flow is published as curves rather than a single rated figure, ask us to check the curve against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Flow for the GFR200 series is published as curves, not as a single rated number, so we do not quote a figure here. Send us your application details and we will confirm the flow curve and the full datasheet figures for this exact model on request before you order.
The M in the code means the bowl is drained by hand at intervals, which suits installations with regular maintenance rounds. If you would rather not drain by hand, the same GFR200-08 configuration is available with an automatic drain (code A) or the default differential-pressure drain - ask us and we will confirm the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.