The AirTAC GFR200C08MLJF2WG AirTAC Filter Regulator G1/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MLJF2WG is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This size 200 configuration has G1/4 (BSPP) ports, a 5 um filter element (code W), a manual drain on the polycarbonate bowl, the low-pressure regulator type, an embedded square gauge scaled in psi, no reverse/check valve, and no mounting bracket. Maximum working (inlet) pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing).
It is a genuine AirTAC part from a range spanning sizes 200, 300, 400 and 600, with ports from 1/8 to 1 inch, PT, G or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge or no-gauge variants, and optional brackets. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C08MLJF2WG AirTAC Filter Regulator G1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Prepares the air feeding clamp cylinders on a CNC fixture: the 5 um element screens water and particles before the clamping valve, and the low-pressure regulator type holds a light, controlled clamp setting.
Conditions the supply to lab rigs and small test actuators, where the psi-scaled square gauge gives a direct pressure readout and the manual drain suits equipment that is attended and purged between runs.
Point-of-use preparation for diverting and pick-and-place actuators along a packaging line, combining water and particle removal with pressure regulation in a single G1/4 unit at the machine.
Step the size and port against the air demand of the circuit: size 200 with G1/4 ports suits compact point-of-use supply, while the larger 300, 400 and 600 sizes carry bigger ports for higher demand. This unit pairs the 5 um element with a manual drain, which is emptied by hand and suits points checked during routine maintenance; automatic and differential-pressure drains are available in the same family. The low-pressure regulator type is intended for circuits held below the standard setting range - the exact adjustment range for the low-pressure type is not published, so confirm it with us. The embedded square gauge reads in psi (MPa and bar scales are options), and this unit carries G (BSPP) threads, where PT is the series standard and NPT is also a catalogue option; a mounting bracket can be ordered separately. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this unit on request.
The manual drain is emptied by hand, which suits supply points checked during routine maintenance; automatic and differential-pressure drains are available in the same family for unattended draining. This unit carries the 5 um element (code W) for finer protection, while the 40 um standard grade is the choice where only coarse particle removal is needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.