The AirTAC GFR200C08MLJF3WT AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLJF3WT is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration carries a 1/4 in NPT port, a fine 5 um filter element (code W), a manual drain for scheduled condensate removal, and the low-pressure regulator type for circuits that run below standard line pressure. An embedded square gauge with bar scale is fitted for local setpoint checks, the bowl is metal, and the unit is supplied without a mounting bracket for direct inline installation. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and is configurable by drain type (manual, automatic or differential-pressure), filter grade (40 um standard, 5 um optional), gauge style and scale, thread (PT standard; G and NPT as order options), bracket and reverse/check valve. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order. No stock claim is made here.
| Model | GFR200C08MLJF3WT AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning for clamping cylinders and small air presses on a fixture line: the 5 um element protects directional valves from particulate, and the low-pressure regulator type suits circuits that run below standard shop-air pressure. The bar-scale square gauge lets a setter verify the clamp setpoint at the machine.
Mounted inline ahead of a solenoid valve stack on a cartoning or labelling machine, this unit filters and regulates the air feeding the island. The 1/4 in NPT port matches standard drop plumbing, and the manual drain fits a line that is bled during scheduled changeover and shutdown.
On a bench used for leak or functional testing of pneumatic assemblies, the low-pressure regulator type supports circuits that must not see full line pressure. The operator drains the metal bowl manually before each session, and the absence of a bracket suits a compact inline hook-up at the bench regulator panel.
Start with the size and port step: GFR200 is the smallest frame in the series and this unit takes a 1/4 in NPT port, so match it to your drop plumbing and let the published flow curves - not a single rating - decide whether 200 is large enough for the application. Choose the drain deliberately: this unit is manual (code M), meaning an operator bleeds accumulated condensate; the same series offers automatic and differential-pressure drains where unattended draining is required. The 5 um element (code W) suits downstream components sensitive to finer particles, while 40 um is the standard grade. The low-pressure regulator type is the right pick for circuits running below standard line pressure; its exact adjustment range is not published, so ask us to confirm it. The fitted square gauge reads in bar; MPa and psi scales and an external round gauge are alternatives. Thread is NPT here, with PT standard and G available as catalogue options to order, and the J code means no mounting bracket - add one if the installation needs panel support. Before ordering, send us the application and we will confirm sizing against the datasheet.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR200 flow as curves, not as a single rated figure, so we do not quote a flow number for this unit. Send us your application - working pressure, downstream consumption and duty - and we will confirm the sizing against the datasheet on request before you order.
The M code in the model means a manual drain: accumulated condensate is bled by an operator, which suits sheltered indoor installations with scheduled maintenance. If the unit will run unattended, the same GFR200 series is available with an automatic drain (code A) or a differential-pressure drain (blank) instead - ask us to quote the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.