The AirTAC GFR300C08JF2K AirTAC Filter Regulator 1/4 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C08JF2K is a filter regulator: water and particulate removal plus downstream pressure regulation combined in a single 300-size body with a 1/4 in PT port. This configuration carries the standard 40 um filter element, a differential-pressure drain that bleeds collected condensate automatically as flow passes through, an embedded square gauge reading in psi, and a built-in reverse (check) valve that holds downstream pressure when the upstream supply is lost. It is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulation range is 0.15-0.9 MPa (20-130 psi), and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, 40 um or 5 um filtration, gauge scale, thread (PT standard, G and NPT as order options) and bracket. Flow is published by AirTAC as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR300C08JF2K AirTAC Filter Regulator 1/4 in PT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Feeding filtered, regulated air to a bench-mounted pneumatic press cell, where the check valve holds the set pressure at the tool if the plant supply dips mid-cycle.
Conditioning the air supply to conveyor diverters and carton-closing cylinders on a packaging line, with the 40 um element keeping wear particles out of the valve stack.
A point-of-use filter regulator on a drop leg in an assembly plant, giving each workstation its own pressure setting and automatic condensate handling without a separate drain visit.
Start with the port step: this unit is the 300 size with a 1/4 in PT port, so size up to 400 or 600 if your line's flow demand points to a larger connection. Choose the drain to match access: differential-pressure (as fitted here) needs no attention at normal flow, automatic drains continuously, and manual suits infrequently visited installations. The standard element is 40 um; specify the W code for 5 um where downstream valves or instruments need finer protection. Gauge scale can be ordered as MPa, psi or bar, and the thread can be PT (standard here), G (BSPP) or NPT. Bracket options apply per code. Because AirTAC publishes flow only as curves and not as a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so no single number is quoted here. Tell us your application and we will confirm the flow and datasheet figures for this 300-size, 1/4 in PT unit on request before you order.
The K code means a reverse (check) valve is fitted, so downstream pressure is held if the upstream supply is interrupted. The F2 code means the embedded square gauge is included with a psi scale; an external round gauge and MPa or bar scales are available as order options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.