The AirTAC GFR400C10AF2T AirTAC Filter Regulator NPT3/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C10AF2T is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in a single body. This size 400 unit is supplied with a 3/8 in NPT port, an automatic drain that ejects collected condensate without manual attention, 40 um standard filtration, and an embedded square gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um standard or 5 um (W) filtration, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR400C10AF2T AirTAC Filter Regulator NPT3/8 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Filtered, regulated air to CNC machining centers and their pneumatic clamps, where steady downstream pressure keeps clamping and tool-change cylinders repeatable.
Clean, pressure-controlled air for the cylinders and actuators on a packaging or cartoning line, with the automatic drain handling condensate through long production shifts.
Regulated air for pneumatic grippers and weld-gun actuation in a robotic welding cell, with 40 um filtration protecting the directional valves downstream.
Sizing starts with the port step: size 400 carries a 3/8 in port, and moving up or down a size changes both the port and the flow capacity, so match the size to the air demand of the circuit rather than to the existing pipe alone. This code carries the automatic drain; manual and differential-pressure drains are the alternatives where the installation suits them. Filtration is 40 um standard - choose the 5 um (W) option where downstream equipment needs finer protection. The embedded square gauge on this unit reads in psi, with MPa and bar scales available to order. Thread is NPT on this code; PT is the standard thread and G (BSPP) is a catalogue option, all stated as specification rather than delivery. A mounting bracket is included. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR400 as curves rather than a single rated figure, so there is no one number we can quote here. Send us your application details and we will confirm the flow and other datasheet figures for you before you order.
The A in this code fits the automatic drain, which ejects collected condensate on its own and suits installations that are not checked daily. The GFR400 is also available with a manual drain or with the differential-pressure default, simply by changing the drain code when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.