The AirTAC GFR400C10F1WT AirTAC Filter Regulator 3/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C10F1WT is a size 400 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is fitted with a 3/8 in NPT port, the fine 5 um filter element (code W) instead of the standard 40 um, a differential-pressure auto drain on the bowl, and the embedded square pressure gauge with MPa scale. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Because flow is published as curves rather than a single rating, we confirm datasheet and flow figures for your application on request.
| Model | GFR400C10F1WT AirTAC Filter Regulator 3/8 in NPT |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Feeding clean, regulated air to the tool-change clamps and pneumatic actuators on a machining centre, where the 5 um element protects fine control valves from particles and carryover water.
Supplying instrument-grade air to calibration benches, pneumatic test panels and analyser enclosures, where the fine 5 um grade and a stable regulated setpoint are required.
Conditioning the air feeding the valve manifold on a packaging or bottling line, keeping moisture and debris out of the valves while holding the pressure the cylinders were set up for.
Choose the size and port step against the air consumption of the circuit: this unit is size 400 with a 3/8 in NPT port, one step up from size 300. The 5 um element (this configuration) suits downstream instrumentation and finer pneumatic components; the standard 40 um element suits general supply. Drain options are differential-pressure (fitted here, which bleeds automatically as flow passes), fully automatic, or manual. Gauge choices are the embedded square gauge (fitted, MPa scale) or an external round gauge, with MPa, psi or bar scales. Threads are PT as standard with G and NPT as order options; a mounting bracket is included.
Flow for the GFR series is published as curves, not as a single rated figure, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your operating pressure and air consumption and we will confirm the flow and datasheet figures for this exact model on request.
The W in the code GFR400C10F1WT selects the optional 5 um filter element instead of the standard 40 um, which suits finer downstream components. With no drain letter in the code, the bowl carries the differential-pressure drain, which bleeds collected condensate automatically as air flows through the unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.