The AirTAC GFR400C10MJF1WT AirTAC Filter Regulator NPT3/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C10MJF1WT is a size 400 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a 3/8 in NPT port, a 5 um filter element (finer than the 40 um standard), a manual drain on the bowl, and an embedded square gauge reading in MPa. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi) with manual drain, maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowl is polycarbonate (PC) at size 400. No mounting bracket is included and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge scale options, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GFR400C10MJF1WT AirTAC Filter Regulator NPT3/8 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Clean, regulated air feeding the tool-change clamps and pneumatic actuators on a machining centre, with the 5 um element guarding fine control valves upstream of the machine.
Conditioning the air that drives pick-and-place and carton-sealing cylinders on a packaging conveyor, with the manual drain emptied during scheduled line checks.
Filtering and regulating shop air down to a stable setpoint for bench-top test rigs and sample-handling pneumatics, read directly off the embedded square MPa gauge.
Step up or down through the GFR sizes (200/300/400/600) to match the port and flow path your line needs; this unit sits at 3/8 in NPT. Choose the drain to suit access: manual suits supervised installations, automatic suits unattended duty, and differential-pressure is the default. Pick 5 um (this unit) where finer particulate protection is needed, or 40 um for general service. Gauge scale is selectable (MPa, psi or bar) and the thread can be ordered as PT (standard), G or NPT. A bracket is optional. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator flow as curves rather than a single rated figure, so we do not quote a number. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request.
The M in the code means the bowl drain is operated by hand, which suits installations that are checked on a routine schedule. If the unit will run unattended, order the A (automatic) variant instead. Note that with a manual drain the regulator adjustment range is 0.05-0.9 MPa (7-130 psi), and the 5 um element in this unit is finer than the 40 um standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.