The AirTAC GFR400C15AC1TK AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C15AC1TK is a size 400 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a 1/2 in NPT port, an automatic drain that expels collected condensate without manual attention, the standard 40 um filter element, a round pressure gauge with MPa scale, a reverse/check valve, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT (standard), G or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um (W) filter grades, square or round gauges with MPa, psi or bar scales, and an optional low-pressure regulator type. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet figures on request.
| Model | GFR400C15AC1TK AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Installed ahead of a directional-valve manifold on a packaging machine, it delivers cleaned air at a set pressure so solenoid valves and their cylinders cycle on a stable supply.
Feeding the air cylinders that divert cartons between conveyor lanes in a distribution centre, it keeps water and debris out of the actuators while holding the set working pressure.
Mounted at the point of use on a factory air drop, it conditions the supply to a bench assembly station where clamps and air tools need filtered air at a regulated pressure.
Size 400 with a 1/2 in NPT port suits lines that move more air than the 200 and 300 frames; step up or down by the flow your circuit actually needs, and ask us to confirm sizing against the published flow curves before ordering. The automatic drain on this unit suits unattended duty; choose manual drain where you want condensate removal under operator control, or the differential-pressure default. The 40 um element is the standard grade; specify 5 um (code W) where finer filtration is required. The round MPa gauge fitted here can be swapped for a square gauge or a psi or bar scale, and the thread can be ordered as PT (standard) or G instead of this NPT version. A bracket is included for panel or surface mounting.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure, set pressure and expected air demand and we will confirm the flow and the full datasheet for this model on request before you order.
The A in the code GFR400C15AC1TK specifies an automatic drain, which expels collected condensate from the bowl without operator attention. The GFR series is also available with a manual drain or the differential-pressure drain as the default, so you can order the drain type that matches how the unit is attended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.