The AirTAC GFR400C15AJC1T AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C15AJC1T is a size 400 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 1/2 in NPT port, an automatic drain that bleeds collected condensate without manual attention, a standard 40 um filter element, and a round pressure gauge with an MPa scale fitted. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The polycarbonate bowl suits this size, and no mounting bracket is included in this code.
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of automatic, manual or differential-pressure drains, 40 um or 5 um (W) filtration, gauge and scale options, and PT, G or NPT threads. Flow is published by AirTAC as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR400C15AJC1T AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Clean, regulated air feeding the tool-change cylinders and clamping fixtures on a machining cell, with the automatic drain handling condensate through long unattended shifts.
Conditioning the air that drives pick-and-place cylinders and sealing jaws on a packaging conveyor, where a stable set pressure keeps repeat cycles consistent.
A filtered, regulated drop point serving pneumatic tools and fixtures at an assembly bench, with the MPa gauge giving operators a clear line-pressure readout.
Size 400 with a 1/2 in port sits in the upper half of the GFR range; step up to 600 or down to 300 according to the flow your line needs - we will check the published flow curves against your demand before you order. Drain choice matters: automatic (as here) suits unattended duty, manual suits periodically checked installations, and differential-pressure drain is the default code. The 40 um element is the standard grade; specify W for 5 um where finer particulate removal is required. Gauge scale can be MPa, psi or bar, thread can be PT (standard), G or NPT, and a bracket can be ordered where this no-bracket code does not suit your mounting. Flow is published as curves, not a single rating, so please ask us to confirm sizing against the application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and we will confirm the relevant datasheet flow figures on request before you order.
The A in the code specifies an automatic drain, which discharges collected condensate from the bowl without operator attention - useful for unattended or hard-to-reach installations. The alternatives in the series are manual drain (code M) and the differential-pressure drain, which is the default when no drain letter is specified.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.