The AirTAC GFR400C15AJC2T AirTAC Filter Regulator NPT1/2 with Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400C15AJC2T is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in a single body. This size 400 unit has a 1/2 in NPT port, an automatic drain that ejects collected condensate without manual attention, a 40 um standard filter element, and a round pressure gauge reading in psi. The standard regulator covers 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The size 400 bowl is polycarbonate, and this configuration is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include manual or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR400C15AJC2T AirTAC Filter Regulator NPT1/2 with Gauge |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Filter and regulate the air feeding a directional-valve manifold on a cartoning or case-packing machine, so cylinders and actuators see clean air at a stable setpoint.
Point-of-use treatment on the drop lines of an automotive assembly cell, conditioning supply air before it reaches impact tools, clamps and air cylinders.
Condition the air that drives gating, diverting and stopper cylinders along a bottling or canning conveyor, with the automatic drain handling condensate between shifts.
Choose the size by port and flow: size 400 with a 1/2 in port sits in the upper-middle of the GFR line (200/300/400/600), one step up from size 300. Drain type is a real decision: this unit has an automatic drain, which suits unattended duty, while manual and differential-pressure drains are orderable alternatives. The 40 um element is standard; specify code W for a 5 um element where finer filtration is needed. The round psi gauge fitted here is the optional external style; the embedded square gauge is standard, and MPa or bar scales can be ordered. Thread is NPT on this unit; G (BSPP) is the alternative to the PT standard. Brackets are optional, and this configuration omits one. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Flow for the GFR400 is published as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the sizing from the AirTAC datasheet on request.
The automatic drain ejects collected condensate from the bowl without manual attention, which suits unattended or hard-to-reach installations. The GFR family is also available with a manual drain (code M) or the differential-pressure drain (the default), so you can match the drain to how the unit is maintained.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.